User manual

PEL-3000 User Manual
52
6. Set the current level parameters using the scroll
wheel and number pad.
 For Static mode, set CC A Value and/or CC B
Value.
 For Dynamic mode, set Level1 and Level2.
 The maximum and minimum current levels
depend on the selected ranges.
7. To add CV mode to CC mode (CC+CV), see
page 58.
8. Set the remaining basic configuration settings
such as the slew rate, and switching mode
settings. See page 63 for details.
Display
Mode
CC
I Range
H 35A
VRange
L 15V
Function
Static
Configure
0.000
V
0.000
A
0.00
w
SlewRate 2500.00
CC B Value 0.000
CC A Value 0.000
LOADRS232
A Value
Fine
03/Sep/2012
mA/uS
A
A
Mode
Current range
Voltage range
Active setting
Current setting
Current settings
Note
Basic CC mode configuration is complete. See
page 63 for more configuration options.
The current range and voltage range applies to all
the operating modes.