User manual

OPERATION
73
Von Voltage Delay
Description
Von Delay is the amount of time the unit will
wait before turning the load on after the Von
Voltage threshold has been latched. This will
prevent overshoot current from affecting the
Von Voltage threshold.
Operation
2. Press
Main
> Configure[F5] > Other[F2] and
set the Von Delay time.
Range:
Von Delay: OFF, 1.0~60ms
Note: CR mode can have the delay time set
separately from the other modes (called Von Delay
–CR when in CR mode).
Timer Functions
Count Time
Description
When Count Time is set to on, it will count the
elapsed time from when the load was turned on
to when it was turned off.
 This function is applicable to manual and
automatic shutdown (such as from protection
functions such as UVP etc.)
 The elapsed time will be shown in the display
Measurement area.