User manual

EXTERNAL CONTROL
113
OVP Setting (:VOLT:PROT)
This command sets or inquires about the OVP (over-voltage
protection) value.
Setting
:VOLT:PROT <value>
Sets the OVP value of a single channel model.
:VOLT:PROT:A <value>
Sets the OVP value of CH1.
:VOLT:PROT:B <value>
Sets the OVP value of CH2.
The <value> range is from 1.00 to 84.00(PSB-L), 10.0 to
840.0(PSB-H).
Two decimal places are valid.
Application
example
:VOLT: PROT 10.10
Sets the OVP value of a single channel model to 10.10V.
Query
:VOLT:PROT?
Inquires about the set OVP value of a single channel
model.
:VOLT:PROT:A?
Inquires about the set OVP value of CH1.
:VOLT:PROT:B?
Inquires about the set OVP value of CH2.
Response
example
10.10
Indicates that the set OVP value is 10.10V.
Remark
None
Output current setting (:CURR)
This command sets or inquires about the output current.
Setting
:CURR <value>
Sets the output current of a single channel model.
:CURR:A <value>
Sets the output current of CH1.
:CURR:B <value>
Sets the output current of CH2.