Datasheet

POWER SUPPLIES
D23
POWER SUPPLIES
D24
Made to Measure. Good Will Instrument Co., Ltd.
FEATURES
* Wide Input Voltage Range and High Power
Factor (P.F)
* High Efficiency and High Power Density
* Constant Voltage and Constant Current
Operation
* Over Voltage , Over Current and
Over Temperature Protection
* Low Ripple and Noise
* Standard Interface : RS-232C
* Option : GPIB ( IEEE-488.2 )
* LabVIEW Driver
* Output ON/OFF Control
* Self-Test and Software Calibration
* LCD Display
* Built-in Buzzer Alarm
PROGRAMMABLE SWITCHING D.C. POWER SUPPLY
PSH-Series
Rear Panel
FEATURES
PSP-Series
PROGRAMMABLE SWITCHING D.C. POWER SUPPLY
* LCD Display
* Output ON/OFF Control
* 3 Steps Fan Speed Control
* Setting of Voltage/Current/Power
* Key Lock to Avoid Error Operation
* Normal , +% & -% Output Operation Key
* Standard Interface : RS-232C
* Optional European Jack Type Terminal
ORDERING INFORMATION
VOLTAGE REGULATION
CURRENT REGULATION
RIPPLE
READBACK (METER) ACCURACY
READBACK (METER) RESOLUTION
PROTECTION
OUTPUT ON/OFF CONTROL
INTERFACE (STANDARD)
DISPLAY
POWER SOURCE
ACCESSORIES :
DIMENSIONS & WEIGHT
OUTPUT
PROGRAM ACCURACY
RESOLUTION
RS-232C
LCD
AC 115V 10% , AC 230V 15%, 50/60Hz
User manual x 1, Power cord x 1, Test lead GTL-104 x 1 , European test lead GTL-204 x 1
225(W) x 100(H) x 305(D) mm ; Approx. 4kg
Load
Line
Load
Line
Voltage (mVrms)
Current (mArms)
Voltage As Program Accuracy As Program Accuracy As Program Accuracy
Current
As Program Accuracy As Program Accuracy As Program Accuracy
Voltage As Resolution As Resolution As Resolution
Current
As Resolution As Resolution As Resolution
OVP/OCP/OPP/OTP
Model
Voltage
Current
PSP-603 PSP-405 PSP-2010
0 ~ 60V 0 ~ 40V 0 ~ 20V
0 ~ 3.5A
0 ~5A
0 ~ 10A
Voltage
0.05%rdg 4digits
0.1%rdg + 5digits
Current
Voltage
20mV
Current
10mV 10mV
2mA 2mA 5mA
10mV
0.05%
10mV
0.05%
10mV
0.05%
5mA
0.05%
20mV
10mA
20mV
10mA
20mV
10mA
0.05%rdg 3digits
0.1%rdg + 5digits
0.05%rdg 3digits
0.3%rdg + 10digits
5mA
0.05%
5mA
0.05%
PSP-603 200W Programmable Switching DC Power Supply
PSP-405 200W Programmable Switching DC Power Supply
PSP-2010 200W Programmable Switching DC Power Supply
SPECIFICATIONS
The PSP-Series is single output, 200W, programmable switching DC power supply. OVP, OCP, OTP,
and OPP protect PSP and loads from unexpected conditions. Large LCD panel with simultaneous
output/parameter view, key lock feature for preventing improper use, and output power setting in
addition to the standard voltage/current, provide comfortable operation. SCPI command set and
Labview driver access through RS-232C interface provide remote control and ATE software development
capability. The simple, safe, and inexpensive PSP-Series is suitable for generic bench-top applications in
laboratories and educational institutions.
GRA-403 Rack Adapter Panel
SPECIFICATIONS
REGULATION ( CV )
REGULATION ( CC )
RIPPLE & NOISE
READBACK ( Meter ) ACCURACY
READBACK ( Meter ) RESOLUTION
PROTECTION
OUTPUT ON/OFF CONTROL
INTERFACE
POWER SOURCE
ACCESSORIES :
DIMENSIONS & WEIGHT
OUTPUT
PROGRAM ACCURACY
RESOLUTION
RECOVERY TIME ( 50% Step Load Change From 25%~75% )
RESPONSE ( Rise/Fall ) TIME
READBACK TEMP. COEFFICIENT
Load
0.1%+5mV 0.1%+5mV 0.1%+5mV
Line
0.05%+5mV 0.05%+5mV 0.05%+5mV
Load
0.2%+5mA 0.2%+10mA 0.2%+15mA
Line
0.2%+5mA 0.2%+10mA 0.2%+15mA
10mVrms 10mVrms 10mVrms
100mVp-p 20Hz~20MHz
100mVp-p 20Hz~20MHz 100mVp-p 20Hz~20MHz
Voltage (mVrms)
Voltage (mVp-p)
Current (mArms)
0.2% 0.2%+20mA 0.2%+40mA
Voltage As Program Accuracy As Program Accuracy As Program Accuracy
Current
As Program Accuracy As Program Accuracy As Program Accuracy
Voltage As Resolution As Resolution As Resolution
Current
As Resolution As Resolution As Resolution
OVP/OCP/OTP
Rush Current
Standard : RS-232C; Option01 : GPIB ( order GPIB interface RS-232C will be deleted)
AC90V~250V, 50/60Hz
User manual x 1
10V
20V
36V
60V
36A(PSH-1036A) 70A(PSH-1070A) 100A(PSH-10100A)
18A(PSH-2018A) 35A(PSH-2035A) 50A(PSH-2050A)
10A(PSH-3610A) 20A(PSH-3620A) 30A(PSH-3630A)
6A(PSH-6006A) 12A(PSH-6012A) 18A(PSH-6018A)
Voltage
36V
>36V
Current
10V
20V
36V
60V
0.05%+25mV 0.05%+25mV 0.05%+25mV
0.05%+50mV 0.05%+50mV 0.05%+50mV
0.2%+30mA 0.2%+60mA 0.2%+90mA
0.2%+30mA 0.2%+30mA 0.2%+60mA
0.2%+30mA 0.2%+30mA 0.2%+30mA
0.2%+30mA 0.2%+30mA 0.2%+30mA
Voltage
36V 10mV
>36V 20mV
Current
20mV
10mV
20mV
10mV
10V
10mA 20mA 30mA
20V
10mA 10mA 20mA
36V
10mA 10mA 10mA
60V
10mA 10mA 10mA
CV Mode 2mS 2mS 2mS
Voltage Up(10%~90%)
Voltage Down(90%~10%)
150mS( 10% rating load) 150mS( 10% rating load) 150mS( 10% rating load)
150mS( 95% rating load) 150mS( 95% rating load) 150mS( 95% rating load)
Voltage (25 5 )
100ppm/ C 100ppm/ C 100ppm/ C
108(W)x141(H)x388(D)mm 188(W)x141(H)x388(D)mm 268(W)x141(H)x388(D)mm
Approx. 3.3kg Approx. 6.2kg Approx. 9.3kg
ORDERING INFORMATION
PSH-1036A
PSH-1070A
PSH-10100A
PSH-2018A
PSH-2035A
PSH-2050A
PSH-3610A
360W Programmable Switching D.C. Power Supply
700W Programmable Switching D.C. Power Supply
1000W Programmable Switching D.C. Power Supply
360W Programmable Switching D.C. Power Supply
700W Programmable Switching D.C. Power Supply
1000W Programmable Switching D.C. Power Supply
360W Programmable Switching D.C. Power Supply
PSH-3620A
PSH-3630A
PSH-6006A
PSH-6012A
PSH-6018A
720W Programmable Switching D.C. Power Supply
1080W Programmable Switching D.C. Power Supply
360W Programmable Switching D.C. Power Supply
720W Programmable Switching D.C. Power Supply
1080W Programmable Switching D.C. Power Supply
Option
Opt. 01:
GPIB Interface ( Factory Installed)
NOTE : When Opt.01 GPIB interface is ordered, the standard interface RS-232C will be deleted.
The PSH Series is single output, 360 to 1080W, programmable switching DC power supply. OVP, OCP,
and OTP protect PSH and loads from unexpected conditions. Remote sensing adds extra level of
precision by compensating cable losses between loads. LCD panel with simultaneous output/parameter
view provides comfortable operation. Self-test and software calibration features also reduce maintenance
overhead. SCPI command set and LabVIEW driver access through RS-232C or optional GPIB interface
provide remote control and ATE software development capability. Modular architecture, exclusive rear-
panel output, and 19inch, 4U rack mounting option ensure the PSH Series is optimized for large
systems. (Note: only one interface, RS-232C or GPIB, can be installed at a time)
Optional Accessories
Optional Accessories
Rear Panel
GTL-232A RS-232C Cable
GTL-232 RS232C Cable, 9-pin Female to 9-pin, null Modem for Computer
GTL-232 RS232C Cable, 9-pin Female to 9-pin, null Modem for Computer