GW Instek PSU-HV Series Programmable Switching D.C. Power Supply New Product Announcement This document allows GW Instek's partners to quickly grasp product's main features, FAB and ordering information.
GW Instek PSU-HV series has five models, including PSU 100-15, PSU 150-10, PSU 300-5, PSU 400-3.8, and PSU 600-2.6. The launch of PSU-HV is to complete the existing PSU series so as to satisfy high voltage application demands, allowing the augmented PSU series to cover a voltage range from 6V to 600V. PSU-HV inherits the functional design and maintains the high power density characteristic and 1U height appearance of the PSU-LV series (PSU 6200, PSU 12.5-120, PSU 20-76, PSU 40-38 和 PSU 60-25).
can help users save costs on augmentation equipment for connecting slave while using LAN or USB. The new PSU-HV series is ideal for the primary input of DC/DC converter and servomotor production application. PSU is often integrated into component test systems such as aging test equipment for capacitors; 600V DC bias applications; aging test equipment for diode; semiconductor production equipment; automotive electronics; and ECU for V8 engine or V12 engine, etc.
Communications equipment Aging test equipment for diodes LED industry application Power supply for communications equipment Panel Introduction Front Panel Back Panel Front Panel Back Panel 1. AC Power Switch (AC Power On / Off) 6. AC Input (Wire 2. USB A Port Clamp Connector) 11. Analog Control Interface 12. Remote Sense 3. Voltage Knob 7. DC Output Terminal 4. Display Area 8. USB one of three)GPIB 5. Current Knob 9. LAN Interface Card / Isolate 10.
Important Information of Product Ordering Key Dates for Product Announcement 1. Order Queue Open(2017 年 7 月 6 日) 2. Global Market Announcement (2017 年 8 月 3 日) Service Policy 1. PSU-HV Programmable Switching DC Power Supply carries a standard warranty for 3 years. 2. Service Support. The service instructions in the Service Manual will help distributors repairing damage units promptly.
Optional Accessories PSU-GPIB GPIB Interface card (factory option) PSU-ISO-V Voltage programming isolated analog interface PSU-ISO-I Current programming isolated analog interface PSU-01C Cable for 2 units of PSU-series in parallel mode connection PSU-01B Bus bar for 2 units of PSU-series in parallel mode connection PSU-01A Joins a vertical stack of 2 PSU units together. 2U-sized handles x2, joining plates x2.
Detailed Product Information Detailed descriptions for features ...................................................................................................................................8 Models...............................................................................................................................................................................8 Series/parallel operation and high power density....................................................................................
Detailed descriptions for features Models The existing PSU series has five models. Detailed descriptions on model number, output voltage, output current and output power are as follows: Model PSU 6-200 PSU 12.5- PSU 20-76 PSU 40-38 PSU 60-25 120 number Channel 1 1 1 1 1 Output 0 – 6V 0 – 12.5V 0 - 20V 0 - 40V 0 - 60V 0 – 200A 0 – 120A 0 – 76A 0 – 38A 0 – 25A 1200W 1500W 1520W 1520W 1500W voltage Output current Output power The new PSU-HV series has five models.
Series/parallel operation and high power density Series connection 1 unit 2 units To augment output power, the PSU series can Height of sets 1U 2U realize two-fold rated power (models under PSU 6-200 6V 12V 300V) via 2 same model units in series 200A 200A PSU 12.5-120 PSU 20-76 PSU 40-38 PSU 60-25 PSU 100-15 PSU 150-10 PSU 300-5 PSU 400-3.8 PSU 600-2.6 connection; and four-fold rated power via 4 same model units in parallel connection so as to 12.
PSU 60-25 PSU 100-15 PSU 150-10 PSU 300-5 PSU 400-3.8 PSU 600-2.6 60V 60V 60V 60V 25A 50A 75A 100A 100V 100V 100V 100V 15A 30A 45A 60A 150V 150V 150V 150V 10A 20A 30A 40A 300V 300V 300V 300V 5A 10A 15A 20A 400V 400V 400V 400V 3.8A 7.6A 11.4A 15.2A 600V 600V 600V 600V 2.6A 5.2A 7.8A 10.4A Remark: 1U 43.6mm Remote program control (Up to 31 units connection) Provide RS-232, RS-485, USB, GPIB and LAN for PC to remote control Master PSU.
C.V/C.C priority mode Conventional power supplies under the CV priority mode will produce inrush current and surge voltage at turn-on. The PSU series has CV and CC priority modes. The CC priority mode can prevent inrush current and surge voltage from occurring at turn-on to protect DUT Under the conventional C.V mode, inrush current and surge voltage appeared at forward voltage (Vf) of LED Under C.C priority mode, inrush and surge voltage are effectively restrained.
Voltage Slew Rate Current Slew Rate 0.001V~0.06V/msec (PSU 6-200) 0.001V~0.125V/msec (PSU 12.5-120) 0.001V~0.2V/msec (PSU 20-76) 0.001V~0.4V/msec (PSU 40-38) 0.001V~0.6V/msec (PSU 60-25) 0.001V~1.000V/msec (PSU 100-15) 0.001V~1.500V/msec (PSU 150-10) 0.001V~1.500V/msec (PSU 300-5) 0.001V~2.000V/msec (PSU 400-3.8) 0.001V~2.400V/msec (PSU 600-2.6) 0.001A~2A / msec (PSU 6-200) 0.001A~1.2A / msec (PSU 12.5-120) 0.001A~0.76A / msec (PSU 20-76) 0.001A~0.38A / msec (PSU 40-38) 0.001A~0.25A / msec (PSU 60-25) 0.
Trigger control (Trigger input/Trigger output) PSU provides users with complete trigger input and trigger output functions so as to flexibly control PSU. Each function is elaborated as follows: Trigger Input function: ①. Allow users to set the effective pulse width from 0~ 60ms for trigger input (0: the LOW or HIGH signal of DC level for trigger input) ②. Receive trigger input to control PSU output or to output preset voltage and current. ③. Receive trigger input to upload preset memory parameters.
Panel Lock mode Panel lock mode is to avoid any accidental changes on the preset parameters. Panel will be locked if users utilize PC control via interfaces such as standard USB, RS-232, RS-485, LAN or optional GPIB. External analog control function The rear panel of the PSU series has an analog control terminal. The external analog control interface allows external voltage or resistance to control voltage and current output; and allows power supply to output or to be turned on and off.
External on-off to control output, on or off PSU-HV Series DC Power Supply New Product Announcement - 15
Product comparison Features, Advantages and Benefits Features Advantages Program commands are compatible to competitors’ Most complete interface support Flexible power augmentation capability Three sets of memory function Customers’ Benefits Built-in competitors’ program commands Users do not have to rewrite programs when switching to different brands and using a new instrument. Select competitors’ model numbers to find compatible commands.
Comparison with major competitors Brand Gwinstek B&K TDK-Lamda Keysight Magna-Power Model PSU XLN GEN N5700 SL X X X X X LED LCD LED LED LED Output ON/OFF Delay function ◎ X X X X CV/CC Priority function ◎ X X X X CV/CC Slew rate function ◎ ○ X X X Internal Resistance function ○ X X X X Bleeder ON/OFF function ◎ X X X X OCP Delay setting function function ◎ X X X X Measurement average setting ◎ ○ X X X Memory Function on Front panel ◎ X X X
Specifications Model PSU 100-15 150-10 300-5 400-3.8 600-2.6 Rated output voltage (*1) V 100 150 300 400 600 Rated output current (*2) A 15 10 5 3.8 2.6 Rated output power W 1500 1500 1500 1520 1560 Constant Voltage Mode PSU 100-15 150-10 300-5 400-3.8 600-2.6 Line regulation(*3) mV 12 17 32 42 62 Load regulation(*4) mV 12 17 32 42 62 p-p (*6) mV 80 100 150 200 300 r.m.s.
External voltage control output current Accuracy and linearity: ±1% of rated output current. External resistor control output voltage Accuracy and linearity: ±1% of rated output voltage. External resistor control output current Accuracy and linearity: ±1.5% of rated output current. Output voltage monitor Accuracy: ±1% Output current monitor Accuracy: ±1% Shutdown control Turns the output off with a LOW (0V to 0.5V) or short-circuit.
Maximum input power VA 100Vac / 200Vac 100Vac / 200Vac Power factor Efficiency (*13) 2000 0.99 / 0.98 % 84 / 87 84 / 87 84 / 87 84 / 87 84 / 87 150-10 300-5 400-3.8 600-2.6 20ms or greater Hold-up time Interface Capabilities PSU 100-15 TypeA: Host, TypeB: Slave, Speed: 1.1/2.
Sincerely yours, Overseas Sales Department Good Will Instrument Co., Ltd No. 7-1, Jhongsing Road, Tucheng Dist., New Taipei City 23678, Taiwan R.O.C Email: marketing@goodwill.com.