Information

PSU-HV Series DC Power Supply New Product Announcement - 19
External voltage control output current
Accuracy and linearity: ±1% of rated output current.
External resistor control output voltage
Accuracy and linearity: ±1% of rated output voltage.
External resistor control output current
Accuracy and linearity: ±1.5% of rated output current.
Output voltage monitor
Accuracy: ±1%
Output current monitor
Accuracy: ±1%
Shutdown control
Turns the output off with a LOW (0V to 0.5V) or short-circuit.
Output on/off control
Possible logic selections:
Turn the output on using a LOW (0V to 0.5V) or short-circuit, turn the output off
using a HIGH (4.5V to 5V) or open-circuit.
Turn the output on using a HIGH (4.5V to 5V) or open-circuit, turn the output off
using a LOW (0V to 0.5V) or short-circuit.
Alarm clear control
Clear alarms with a LOW (0V to 0.5V) or short-circuit.
CV/CC/ALM/PWR ON/OUT ON indicator
Photocoupler open collector output; Maximum voltage 30V, maximum sink current
8mA.
Trigger out
Maximum low level output = 0.8V; minimum high level output = 2V; Maximum
source current = 8mA.
Trigger in
Maximum low level input voltage = 0.8V; minimum high level input votage = 2V,
Maximum sink current = 8mA.
Front Panel PSU 100-15 150-10 300-5 400-3.8 600-2.6
Display, 4 digits, Voltage accuracy 0.1% + mV 200 300 600 800 1200
Current accuracy 0.2% + mA 45 30 15 11.4 7.8
Indications
GREEN LED's: CV, CC, V, A, VSR, ISR, DLY, RMT, LAN, M1, M2, M3, RUN,
Output ON
RED LED's: ALM, ERR
Buttons
Lock/Local(Unlock), PROT(ALM_CLR), Function(M1), Test(M2), Set(M3), Shift,
Output
Knobs
Voltage, Current
USB port
Type A USB connector
Programming and Measurements
(RS-232/485, USB, LAN, GPIB)
PSU 100-15 150-10 300-5 400-3.8 600-2.6
Output voltage programming accuracy 0.05% + mV 50 75 150 200 300
Output current programming accuracy 0.2% + mA 15 10 5 3.8 2.6
Output voltage programming resolution mV 3.4 5.2 10.2 13.6 20.4
Output current programming resolution mA 0.5 0.34 0.19 0.13 0.09
Output voltage measurement accuracy 0.1% + mV 100 150 300 400 600
Output current measurement accuracy 0.2% + mA 30 20 10 7.6 5.2
Output voltage measurement resolution mV 3.4 5.2 10.2 13.6 20.4
Output current measurement resolution mA 0.5 0.34 0.19 0.13 0.09
Input Characteristics PSU 100-15 150-10 300-5 400-3.8 600-2.6
Nominal input rating
100Vac to 240Vac, 50Hz to 60Hz, single phase
Input voltage range
85Vac ~ 265Vac
Input frequency range
47Hz ~ 63Hz
Maximum input current
100Vac /
200Vac
A
21 / 11
Inrush current
Less than 50A.