Manualshelf

User manual

ManualsBrandsGW INSTEK ManualsLaboratory & Bench PSUs19" bench PSU (adjustable voltage) 0 - 40 Vdc 0 - 38 A 1 x Ethernet, RS232, RS485, USB remote con
111112113114115116117118119120
PSU Series User Manual
120
Note
The input impedance for external voltage control is
1MΩ.
Use a stable voltage supply for the external voltage
control.
Note
CV and CC Slew Rate Priority are disabled for V-I
mode (F-03) when using external voltage control.
See the normal function settings on page 99.
CAUTION
Ensure no more than 10.5V(F-97 = 1) or 5.25 (F-97
= 0) volts are input into the external voltage input.
Ensure the voltage polarity is correct when
connecting the external voltage.