User manual

ManualsBrandsGW INSTEK ManualsLaboratory & Bench PSUs19" bench PSU (adjustable voltage) 0 - 40 Vdc 0 - 38 A 1 x Ethernet, RS232, RS485, USB remote con

COMMUNICATION INTERFACE

173

2. Press the Function key to enter the

Normal configuration settings.

Page 109

Set the following LAN settings:

F-36 = 1

Turn LAN on

F-37 = 1

Enable DHCP

F-59 = 1

Turn the web server on

F-60 = 0 or 1

Set to 0 to disable web

password, set to 1 to enable web

password

F-61 = 0000

~9999

Set the web password

3. The LAN indicator will turn on when a

network cable is plugged in.

LAN indicator

AV

VOLTAGE CURRENT

VSR LAN RMT ERR DLY ALM ISR M 1 M 2 M 3 RUN

C V C C

Note

It may be necessary to cycle the power or refresh

the web browser to connect to a network.

Web Server Remote Control Function Check

Functionality

check

Enter the IP address of the power supply in a

web browser after the instrument has been

configured as a web server (page 172).

The web server allows you to monitor the

function settings of the PSU.

You can check the IP address by checking F-39 to

F-42.

F-39 = AAA

IP Address part 1 of 4

F-40 = BBB

IP Address part 2 of 4

F-41 = CCC

IP Address part 3 of 4