User manual
PSU Programming Manual
96
:SYSTem:COMMunicate:SERial[:RECeive]:T
RANsmit:PARity
Set
Query
Description
Sets or queries the parity of the UART connection.
Note: the setting will only be valid after the power
has been cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit
:PARity <NR1>
:SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit
:PARity?
Parameter/Return
parameter
0
None
1
Odd
2
Even
Example
SYST:COMM:SER:TRAN:PARity?
>1
Indicates that odd parity is used for the UART
connection.
:SYSTem:COMMunicate:SERial[:RECeive]:T
RANsmit:SBITs
Set
Query
Description
Sets or queries the number of stop bits used for the
UART connection. Note: the setting will only be
valid after the power has been cycled.
Syntax
Query Syntax
:SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit
:SBITs<NR1>
:SYSTem:COMMunicate:SERial[:RECeive]:TRANsmit
:SBITs?
Parameter/Return
parameter
0
1 stop bit
1
2 stop bits
Example
SYST:COMM:SER:TRAN:SBITs?
>1
Indicates that one stop bit is used for the UART
connection.