User manual

ManualsBrandsGW INSTEK ManualsLaboratory & Bench PSUs19" bench PSU (adjustable voltage) 0 - 60 Vdc 0 - 25 A 1 x Ethernet, RS232, RS485, USB remote con

ANALOG CONTROL

135

Note

Maximum current is 5mA. Ensure the sensing

circuit has an input impedance greater than 1MΩ.

The monitor outputs are strictly DC and should not

be used to monitor analog components such as

transient voltage response or ripple etc.

CAUTION

Ensure IMON(pin 24) and VMON(pin 25) are not

shorted together. This may cause damage to the

unit.