Datasheet

ManualsBrandsGW INSTEK ManualsLaboratory & Bench PSUs19" bench PSU (adjustable voltage) 600 V (max.) 2.6 A (max.) 1560 W LAN, RS232, USB , RS485 progra

PSU 6-200

PSU 12.5-120

PSU 20-76

PSU 40-38

PSU 60-25

PSU 100-15

PSU 150-10

PSU 300-5

PSU 400-3.8

PSU 600-2.6

SPECIFICATIONS

6V 12.5V 20V 40V 60V

100V

150V

300V

400V 600V

200A 120A 76A 38A 25A 15A 10A

3.8A 2.6A

1200W 1500W 1520W 1520W 1500W 1500W 1500W 1500W 1520W 1560W

60mV 60mV 60mV 60mV

60mV 80mV 100mV 150mV 200mV 300mV

8mV 8mV 8mV 8mV 8mV 8mV 10mV 25mV 40mV 60mV

400mA 240mA 152mA 95mA 75mA 45mA 35mA 25mA 17mA 12mA

2.6mV 3.25mV 4mV 6mV 8mV 12mV 17mV 32mV 42mV 62mV

45mA 29mA 20.2mA 12.6mA 10mA 8mA 7mA 6mA 5 76mA. 5 52mA.

22mA 14mA 9.6mA 5.8mA 4.5mA 3.5mA 3mA 2.5mA 2 38mA. 2 26mA.

12mV

25mV

40mV

80mV

120mV

200mV

300mV

600mV

800mV

1200mV

600mA 360mA 228mA

114mA

75mA 45mA 30mA 15mA

11 4mA.

7 8mA.

r.m.s. (*7)

r.m.s.(*12)

0.1%+

0.2%+

Accuracy and linearity ±0.5% of rated output voltage:

:Accuracy and linearity ±1% of rated output current

:Accuracy and linearity ±1% of rated output voltage

:Accuracy and linearity ±1.5% of rated output current

Accuracy: ±1%

Turns the output off with a LOW (0V to 0.5V) or short-circuit

:Possible logic selections Turn the output on using a LOW (0V to 0.5V) or short-circuit, turn the output off using a HIGH

(4.5V to 5V) or open-circuit; Turn the output on using a HIGH (4.5V to 5V) or open-circuit, turn the output off using a LOW

(0V to 0.5V) or short-circuit

Clear alarms with a LOW (0V to 0.5V) or short-circuit

Photocoupler open collector output; Maximum voltage 30V, maximum sink current 8mA

Maximum low level output = 0.8V; minimum high level output = 2V; Maximum source current = 8mA

Maximum low level input voltage = 0.8V; minimum high level input votage = 2V, Maximum sink current = 8mA

GREEN LED's: CV, CC, V, A, VSR, ISR, DLY, RMT, LAN, M1, M2, M3, RUN, Output ON; RED LED's: ALM, ERR

Lock/Local(Unlock), PROT(ALM_CLR), Function(M1), Test(M2), Set(M3), Shift, Output

Voltage, Current

Type A USB connector

PANEL INTRODUCTION

1. AC Power Switch (AC Power On/Off )

2. USB A Port

3. Voltage Knob

4. Display Area

5. Current Knob

6. AC Input (HV: )Wire Clamp Connector

7. DC Output Terminal

8. USB

9. LAN

10. RS 485/RS 232

11. Analog Control Interface

12 Option Slot for Selection One of Three.( )

GPIB Interface Card/Isolate Voltage Remote

Control Card/Isolate Current Remote

Control Card

13. Remote Sense

SPECIFICATIONS

M DELO

OUTPUT RATINGS

Rated Output Voltage (*1)

Rated Output Current (*2)

Rated Output Power

RIPPLE AND NOISE 5(* )

CVp-p( 10 ~ 20MHz) p-p (*6)

CVrms(5Hz ~ 1MHz)

CCrms(5Hz ~ 1MHz)

LOAD REGULATION

Voltage 4(* )

Current 11(* )

LINE REGULATION

Voltage 3(* )

Current 3(* )

ANALOG PROGRAMMING AND MONITORING

External Voltage Control Output Voltage

External Voltage Control Output Current

External Resistor Control Output Voltage

External Resistor Control Output Current

Output Voltage Monitor

Output Current Monitor

Shutdown Control

Output On/Off Control

Alarm Clear Control

CV/CC/ALM/PWR ON/OUT ON Indicator

Trigger Out

Trigger In

FRONT PANEL

Display, 4 digits, Voltage Accuracy

Current Accuracy

Indications

Buttons

Knobs

USB Port

Analog

Control

LAN