User Manual

PSW Series Programming Manual
60
Trigger Commands
The trigger commands generate and configure software triggers.
TRIGger:TRANsient[:IMMediate] ...................................... 60
TRIGger:TRANsient:SOURce ............................................. 60
TRIGger:OUTPut[:IMMediate] ........................................... 60
TRIGger:OUTPut:SOURce .................................................. 61
TRIGger:TRANsient[:IMMediate]
Set
Query
Description
Generates a software trigger for the transient
trigger system.
Syntax
TRIGger:TRANsient[:IMMediate]
TRIGger:TRANsient:SOURce
Set
Query
Description
Sets or queries the trigger source for the transient
system.
Syntax
Query Syntax
TRIGger:TRANsient:SOURce {BUS | IMMediate}
TRIGger:TRANsient:SOURce?
Parameter/Return
BUS
Internal software trigger. Waits for the
*TRG (or IEEE 488.1 “get” group
execute trigger) command to start the
trigger.
IMMediate
Starts the trigger immediately.
(default)
Example
TRIG:TRAN:SOUR BUS
Sets the trigger source as BUS.
TRIGger:OUTPut[:IMMediate]
Set
Description
Generates a software trigger for the output trigger
system.
Syntax
TRIGger:OUTPut[:IMMediate]