User manual

REMOTE CONTROL
61
Output Commands
OUTPut:DELay:ON............................................................. 61
OUTPut:DELay:OFF ........................................................... 61
OUTPut:MODE.................................................................... 62
OUTPut[:STATe][:IMMediate] ........................................... 62
OUTPut[:STATe]:TRIGgered ............................................. 62
OUTPut:PROTection:CLEar .............................................. 63
OUTPut:PROTection:TRIPped .......................................... 63
OUTPut:DELay:ON
Set
Query
Description
Sets the Delay Time in seconds for turning the
output on. The delay is set to 0.00 by default.
Syntax
Query Syntax
OUTPut:DELay:ON <NRf>
OUTPut:DELay:ON?
Parameter
<NRf>
0.00~99.99 seconds, where 0=no delay.
Return parameter
<NRf>
Returns the delay on time in seconds until the
output is turned on.
OUTPut:DELay:OFF
Set
Query
Description
Sets the Delay Time in seconds for turning the
output off. The delay is set to 0.00 by default.
Syntax
Return Syntax
OUTPut:DELay:OFF <NRf>
OUTPut:DELay:OFF?
Parameter
<NRf>
0.00~99.99 seconds, where 0=no delay.
Return parameter
<NRf>
Returns the delay off time in seconds until the
output is turned off.