User manual

PSW Series Programming Manual

Parameter

<NRf>

0~32767

Return parameter

<NR1>

0~32767

STATus:PRESet

Set

Description

This command resets the ENABle register, the

PTRansistion filter and NTRansistion filter on the

Operation Status and Questionable Status

Registers. The registers/filters will be reset to a

default value.

Default Register/Filter Values

Setting

QUEStionable Status Enable

0x0000

QUEStionable Status Positive Transition

0x7FFF

QUEStionable Status Negative Transition

0x0000

Operation Status Enable

0x0000

Operation Status Positive Transition

0x7FFF

Operation Status Negative Transition

0x0000

Summary: The Questionable Status Enable

registers and the Operation Status Enable registers

are both reset to 0.

The Questionable Status and Operation Status

Positive Transition filters are all set high (0x7FFF)

and the Negative Transition filters are all set low

(0x0000). I.e., only positive transitions will be

recognized for the Questionable Status and

Operation Status registers.

Syntax

STATus:PRESet