Instructions

APPENDIX
119
PSW Specifications
The specifications apply when the PSW is powered on for at least
30 minutes.
PSW 30-36, PSW 80-13.5
Model PSW 30-36 PSW 80-13.5
DC Output
Ratings:
Voltage 30V 80V
Current 36A 13.5A
Power 360W 360W
Load Effect:
Voltage 0.05% of rating + 5mV 0.05% of rating + 5mV
Current 0.1% of rating + 5mA 0.1% of rating + 5mA
Source Effect: (change from 85-132 VAC input or 170-265 VAC input)
Voltage 0.05% of rating + 3mV 0.05% of rating + 3mV
Current 0.1% of rating + 5mA 0.1% of rating + 5mA
Output Ripple and Noise: (Noise Bandwidth=20MHz, Ripple Bandwidth=1MHz)
CV p-p 60mV 60mV
CV rms 7mV 7mV
CC rms 72mA 27mA
Programming
accuracy
Voltage 0.05% + 10mV 0.05% + 10mV
Current 0.1% + 30mA 0.1% + 10mA
Measurement
accuracy
Voltage 0.1% + 10mV 0.1% + 10mV
Current 0.1% + 30mA 0.1% + 10mA
Load Transient Recovery Time:(time for output voltage to recover within 0.1% +
10mV of its rated output for a load change from 50 to 100% of its rated output
current)
Time 1ms
Output Response Time:
Rise time 50ms
Fall time, full
load
50ms
Fall time, no
load
500ms
Programming/
Measurement
Resolution:
Voltage 1mV (by PC remote
control mode)
2mV(by PC remote
control mode)
Current 1mA (by PC remote
control mode)
1mA (by PC remote
control mode)
Series and Parallel Capability
Parallel
operation
Up to 3 units including the master unit
Series
operation
Up to 2 units including the master unit