Instructions

PSW Series User Manual
80
Internal
Resistance
Settings
Sets the internal resistance of the power supply.
F-08
0.000
Ω~0.833Ω (PSW 30-36)
0.000
Ω ~0.417Ω (PSW 30-72)
0.000
Ω ~0.278Ω (PSW 30-108)
0.000
Ω ~5.926Ω (PSW 80-13.5)
0.000
Ω ~2.963Ω (PSW 80-27)
0.000
Ω ~1.975Ω (PSW 80-40.5)
Bleeder Control
Bleeder control turns ON/OFF the bleeder
resistor. Bleeder resistors discharge the filter
capacitors after power is turned off as a safety
measure.
F-09 0 = OFF, 1 = ON
Buzzer ON/OFF
Turns the buzzer sound on or off. The buzzer is
associated with alarm sounds and keypad entry
sounds.
F-10 0 = ON, 1 = OFF
USB/GPIB Settings
Front Panel USB
State
Displays the front panel USB-A port state. This
setting is not configurable.
F-20 0 = Absent, 1 = Mass Storage
Rear Panel USB
State
Displays the rear panel USB-B port state. This
setting is not configurable.
F-21
0 = Absent, 2 = USB-CDC,
3 = GPIB-USB adapter
Rear Panel USB
Mode
Sets the rear panel USB mode.
F-22
0 = Disable, 1 = GPIB-USB
adapter (for GUG-001),
2 = USB CDC
GPIB Address
Sets the GPIB address.
F-23 0~30