Instructions

ManualsBrandsGW Instek ManualsBench power supply unitsGW Instek PSW80-27 Bench PSU (adjustable voltage) 0 - 80 V DC 0 - 27 A 720 W No. of outputs 1 x

PSW Series User Manual

100

Connection

 Pin2 → Switch

 Pin24 → Switch

 Wire shield → negative (-) output terminal

Panel operation

1. Connect the external switch according to the

connection diagrams above.

Set F-94 (External output logic) in

the power on configuration

settings to 0 (High = On) or 1

(Low = On).

 Be sure to cycle the power after

setting the power on

configuration settings.

Page 86

2. Press the Function key and confirm

the new configuration settings.

3. The switch is now ready to set the output on or

off.