Instructions

PSW Series User Manual
110
Settings
DHCP IP Address
Subnet Mask Gateway
DNS Address Sockets Active
Web Server Active Web Password Active
Web set password 0000~9999 (default 0000)
Connection
Connect an Ethernet cable from
the network to the rear panel
Ethernet port.
DHCP
Connection
Example
Use the Following configuration settings to use
Dynamic Host Configuration Protocol. The
following settings will also automatically assign
an IP address.
6. Press the Function key to enter the
Normal configuration settings.
Page 84
Set the following LAN settings:
F-37 = 1 Turn DHCP to enable
F-59 = 1 Turn the web server on
Note
It may be necessary to cycle the power or refresh
the web browser to connect to a network.
USB Remote Control Function Check
Functionality
check
Invoke a terminal application such as MTTTY
(Multi-Threaded TTY).
To check the COM port No, see the Device
Manager in the PC. For WinXP; Control panel
→ System → Hardware tab.
Run this query command via the terminal after
the instrument has been configured for USB