Instructions

PSW Series User Manual
44
1. Press the OVP/OCP key. The
OVP/OCP key lights up.
2. The OVP setting will be displayed on the top
and the OCP setting will be displayed on the
bottom.
OVP Level
3. Use the voltage knob to set the
OVP level.
Voltage
Range
10%~110% of rated
output voltage.
OCP Level
4. Use the current knob to set the
OCP level.
Current
Range
10%~110% of rated
output current.
5. Press OVP/OCP again to exit. The
OVP/OCP indicator will turn off.
Power switch trip
6. Set F-95 (Power switch trip) to 1 (to
disable the power switch trip) or to
0 (to enable the power switch trip)
and save.
Page 86
F-95
1 (Disable) or 0 (Enable)