Instructions

PSW Series User Manual
56
Output Voltage/
Output Current
Model Single unit 2 units 3 units
PSW 30-36 30V 30V 30V
36A 72A 108A
PSW 80-13.5 80V 80V 80V
13.5A 27A 40.5A
PSW 30-72 30V 30V 30V
72A 144A 216A
PSW 80-27 80V 80V 80V
27A 54A 81A
PSW 30-108 30V 30V 30V
108A 216A 324A
PSW 80-40.5 80V 80V 80V
40.5A 81A 121.5A
Master-Slave Parallel Connection
Master-Slave
Connector
The Analog Control Connector is used for both
serial and parallel connections. The way the
connector is configured determines the
behavior of the master and slave units. For the
complete connector pin assignment, see page
89.
Analog Connector
Connection
To operate the power supplies in parallel,
connect the analog connectors on the master
and slave units as shown in the diagrams
below.