User Manual

OPERATION
71
Remote monitoring
 Voltage monitoring (VMON) and current
monitoring (IMON) are only supported on
the master unit.
 The VMON voltage represents the total
voltage of the all the serialized units.
Remote Sense
 Please see the remote sense chapter for
details, page 59.
External Voltage and Resistance Control
 Voltage/Resistance controlled remote
control can only be used with the master
unit.
 The full scale voltage (in series) is equivalent
to the maximum external voltage or
resistance.
Slew Rate
 The actual slew rate is double that of the
setting slew rate. I.e., A slew rate setting of
60.00V/s is actually 120V/s when in series.
Internal Resistance
 The internal resistance is actually twice that
of the setting value.
Bleeder Control
 The Master unit is used to control the
bleeder settings. The bleeder resistor is
always turned on for the slave unit in series
mode.