USER’S MANUAL Jewelry Cabinet
Board Iden�fica�on Not actual size C Cabinet Rung x1 A cs@gymaxservice.
PRODUCT ASSEMBLY Board Iden�fica�on STEP 1 Not actual size 1 2 × 6 × 2 3 WOOD DOWEL SCREW × 6 5 SCREW × 1 WRENCH A 2 2 1 3 1 3 B B C D 4 1 1 C 1 5 B 1 D The side without holes of the C plate and D plate is the front side, so it needs to rotate 180 degrees after full assembly.
PRODUCT ASSEMBLY PRODUCT ASSEMBLY STEP 2 4 Maximum Loads × 2 6 SPACER × 2 RING SCREW 23LBS 4 6 6 6 This item is only suitable within the specified maximum load-bearing. Heavier loads than the indicated load capacity may cause instability, resulting in possible injuries.
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
