USER’S MANUAL Jewelry Cabinet
Board Iden�fica�on Not actual size cs@gymaxservice.
PRODUCT ASSEMBLY PRODUCT ASSEMBLY Hand over the door Wall mount 1 × 2 2 SELF TAPPING SCREW × 4 3 SCREW × 2 EXPANSION PIPE 4 × 2 2 HANGING PANEL × 4 5 SCREW × 2 HOOK 6 DOUBLE SIDED TAPE 5 6 × 1 × 1 5 DOUBLE SIDED TAPE 3 3 2 2 A 1 1 4 4 2 2 2 2 Open the jewellery cabinet door 2 2 A Wall Fixed on the wall to prevent swaying 6 4 6 Put the battery here Fixed on the door to prevent swaying 5
PRODUCT ASSEMBLY Wal PRODUCT ASSEMBLY l mo oor the d r e v o nd unt Ha Maximum Loads 22LBS This item is only suitable within the specified maximum load-bearing. Heavier loads than the indicated load capacity may cause instability, resulting in possible injuries.
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area. Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
