USER’S MANUAL 8 PIECE RATTAN SOFA SET THIS INSTRUCTION BOOKLET CONTAINS IMPORTANT SAFETY INFORMATION. PLEASE READ AND KEEP FOR FUTURE REFERENCE.
Before You Start Read each step carefully before starting. It is very important to ensure each step followed in correct order, otherwise assembly difficulties may occur. Most of board parts are labeled or stamped on the raw edges. Have a check to make sure all parts are included. Work in a spacious area, preferably on a carpet close to where the unit will be used. Keep the handtools close at hand. Do not use power tools to assemble your furniture. They may scratch or damage the parts.
Y1 Z1 B H1 Y2 C F H2 Z2 A E2 D T X1 G Z2 E1 D Y2 X2 Q S I M K N O R U Notice 50% Tighten before fixing all screws, Allen wrench is recommended instead of an electric drill. Place the item on a flat ground to adjust and make sure it remains stable. Tighten up all screws with tools gradually. If the screws are not aligned with holes during assembly, please loosen all the other screws to 50% and continue the assembly process.
Part List A 4 pcs B 2 pcs C 2 pcs D 2 pcs E1 1 pc E2 1 pc F 1 pc G 1 pc H1 1 pc H2 1 pc I 1 pc K N 4 pcs O 2 pcs 2 pcs 2 pcs L 1 pc M P 2 pcs Q 1 pc R 1 pc S 1 pc T 1 pc U 1 pc V 1 pc X1 1 pc X2 2 pcs Y1 2 pcs Z2 2 pcs W1 1 pc Y2 2 pcs W2 1 pc 02 Z1 2 pcs
Hardware List Description Hardware Spec Qty M6 x 60 mm 14 pcs M6 x 45 mm 8 pcs Bolt M6 x 35 mm 15 pcs 4 Bolt M6 x 30 mm 46 pcs 5 Bolt M6 x 25 mm 4 pcs 6 Bolt M6 x 1 5 mm 4 pcs 7 Plastic washers M6 x 8 mm 1 pc 8 Steel washers M6 109 pcs 9 Nut M6 22 pcs 10 Wrench M 10 2 11 Allen key M4 2 pcs 1 Bolt 2 Bolt 3 03 pcs
STEP 2 STEP 1 A A 1 9 4 8 1 8 8 8 8 B 2 8 8 x2 9 C 9 x2 STEP 3 x2 Y1 Z1 Finished 04
STEP 4 STEP 5 4 8 2 8 8 9 D E1 8 8 STEP 6 F 1 9 STEP 7 8 3 Y2 Z2 1 H1 2 8 8 9 8 9 8 8 9 8 1 Finished 05
STEP 8 STEP 9 4 8 2 8 8 9 D G E2 1 8 9 STEP 10 STEP 11 3 8 Y2 Z2 1 2 8 8 9 9 8 8 8 9 H2 8 1 Finished 06 8
STEP 12 K STEP 13 L K I 5 3 8 STEP 14 8 X1 Finished 07
STEP 15 STEP 16 x2 x2 M N 4 8 P 4 8 4 8 O N STEP 17 X2 x2 Finished 08
STEP 18 STEP 19 T 8 S 3 3 8 3 3 Q 7 8 8 3 8 6 R U 6 3 8 3 8 STEP 20 STEP 21 X2 Y1 2 8 4 8 4 4 8 2 Y2 V Z1 4 2 Z2 8 2 2 W1 Install part W1 then arrange all cushions inside storage Finished 09
STEP 22 STEP 23 STEP 24 W2 Finished 10
Care and Maintenance Use a soft, clean cloth that will not scratch the surface when dusting. Use of furniture polish is not necessary. Should you choose to use polish, test first in an inconspicuous area.Using solvents of any kind on your furniture may damage the finish. Never use water to clean your furniture as it may cause damage to the finish. Liquid spills should be removed immediately. Using a soft clean cloth, blot the spill gently. Avoid rubbing.
