Please see attached graph for osculation’s per minute and seconds. Congratulations! You have bought the most advanced home vibration machine. In no time at all you will be toned and in perfect shape. Always consult the instructions and please retain for future use. Set includes – 1 x Gymform® Vibro Max unit. 1 x Instruction and Construction guide.
Constructing the Gymform® Vibro Max Before starting please lay out all of the parts listed below. Additional to the components below you will also need some cello tape.
- Connect the bottom connector of wire Nº 2 with the wire in the main unit. Please see the photo. Make sure the wires remain connected. 1 - Lay the main unit (Nº1) on an even surface 2 - Take wire Nº 2 and pass it down the middle of the suport tube Nº 3. Please pay attention to have the larger connector at the top. With some cello tape (not supplied) tape the larger connector of the wire Nº 2 onto the main suport tube Nº 3.
7 - Please use tool A. At the bottom of the main suport tube Nº 3 use the screws Nº 4 and washers Nº 5 to attach the main suport tube Nº 3 and the main unit Nº 1. The photograph below shows how the main suport tube should look like when connected and assembled. 8 - Now take the 2 bottom suport bars no 6 and place into the main unit no 1 Please make sure the top of the bottom suport bars no 6 are angled away from the main unit.
16 - Now connect plug Nº14 to main unit Nº1 and connect to an electricity supply. - Well done you are now ready to use the Gymform® Vibro Max. 14 - Place the control panel Nº 12 onto the main suport tube Nº 3 and feed the wires inside the main suport tube Nº 3. 15 - Now using screws Nº 13 at the bottom side of the control panel Nº 12 there are 3 holes. Use tool B to secure the control panel Nº 12 to the main suport tube Nº3.
Operating Instructions Programs of the Gymform® Vibro Max. There are 5 specifically designed programs. Consult the following list to choose the program that best fits your needs. 88 – Manuel Mode – choose between intensity levels of 1 to 50, depending on the speed you want. Consult the attached graph for the relation between speed and oscillations per minute. P1 – Strength and Power Conditioning Program. Slowly increases your body’s heart rate and vibration resistance. P2 – Fat Burning Program.