Use Instructions

ELST026-AUM001-V0.6.2 Page 25 of 68
4.1.1.2 Option pane buttons in a therapy screen
Enabled
selected
functionality
Therapy screen is in standard modes in traditional parameter design.
See § 4.1.1 and § 4.1.3.1 and § 4.1.4.1
Specific behaviour:
The intensity starts from 0 and there’s no preset intensity value target. The
intensity must be increased manual with the button. For every press in-
creases the intensity only one stepsize.
Press button to decrease the intensity with one stepsize.
Therapy screen is in advanced modes in dashboard parameter design.
See § 4.1.2 and § 4.1.3.2 and § 4.1.4.2
Specific behaviour:
The treatment intensity will increase (fade-in) automatic to the preset intensity
value according to a chosen ramp curve once the start button on the handpiece
is pressed.
Show the applied treatment in a graphical representation
See § 4.1.1.3
Further continue the treatment session with a next sequence
See § 4.1.1.5
Close and save the performed treatment application
See § 4.1.1.4
4.1.1.3 Show the applied treatment in a graphical representation
Procedure:
1. Once the treatment application is stopped it is
possible to view it again by selecting the
enabled button in the options pane.
2. The line graph represents the performed treatment
plotting the current amplitude versus time.
3. The treatment results are more detailed shown in in
the lower part of the screen.