Use Instructions

ELST026-AUM001-V0.6.2 Page 34 of 68
4.2.1 Therapy selection via Body Area
4.2.1.1 Load a protocol with preconfigured settings via Body area
Procedure
1.
Press the Body Area button
2.
Press the dot corresponding to the anatomical
location you want to choose an application from
3.
In the example on the right side is already chosen for
an existing treatment application at the Shoulder
4.
Press the load button to open the
corresponding parameter screen with the
preconfigured settings
5.
From here on the treatment can be applied
4.2.1.2 Create an own settings application via Body Area
Procedure
1.
Press the Body area button
2.
Press the dot corresponding to the anatomical
location you want to choose an application from
3.
When the list does not contain yet the desired
treatment application it is possible to create a new
own settings application.
4. Select the new button to create a new appli-
cation
5. Enter a name for the new application
6. Make the desired parameter settings
7.
Press the close button to leave the screen
8.
A question box appears to save the created
treatment application
9. Once saved this created application becomes
added in the corresponding list
10. From now on it can be selected as an own set-
tings application