Use Instructions

ELST026-AUM001-V0.6.2 Page 53 of 68
7 TECHNICAL DATA
7.1 General
Dimensions Unit (w
x
d
x
h) 210 x 160 x 90 mm
Weight ~ 0,85 kg
Weight incl. accessories ~ 1,00 kg
Supply voltage 12 VDC
Maximum currrent rating 2 A
Class Electrical class II
Dimensions hand piece (w
x
d
x
h) 175 x 16 x 16 mm
Weight hand piece ~ 0,060 kg
Weight power supply ~ 0,17 kg
Mains voltage 100-240 V, 50-60 Hz
Current rating 0.6 A - 0.3 A
Maximum power rating 24 W
Operation mode suited for continuous operation
7.2 Electrotherapy performance
Specifications put forth in this manual were in effect at the time of publication. However, due to
the GymnaUniphy policy of continuous improvement to keep up with the most recent clinical
evidence, the applications and protocols may change at any time without obligations on the part of
GymnaUniphy.
7.2.1 General
Applied part safety Type BF (floating patient circuit)
Treatment time 0 - 60 min.
Current waveform Direct current
Output stage type Constant current source
Limitation +150% of the set value at 10% of the maximum range
decreasing to +110% of this maximum
Accuracy Load 500-1000 Ω ± 10%
Polarity The acupuncture needle is always the negative pole
Patient circuit closed detection Active during percutaneous electrolysis treatments. Turned off for
dry needling.
150 µA, 148 kHz