Use Instructions

Initial Startup
17
EN
CAUTION!
The scale can be disinfected by wiping off. Do not sterilize the scale.
The fluid monitoring unit is a cart/scale system consisting of a weighing unit for
the irrigation fluid bags and containers as well as a roller foot.
1. Place pump on the pump tray of (5) the cart/scale system.
2. Run the power cable through the notch of the pump tray provided for this
purpose (6). Connect the power cable (5) with the pump and a grounded
safety wall socket (Fig. 4-2).
3. Run the fluid monitoring unit cable (7) through the notch of the pump tray
provided for this purpose (6) (Fig. 4-2). Connect the fluid monitoring unit ca-
ble (7) with the connection in the rear of the pump (Fig. 4-2). Make a loop
with the pump cable to prevent bending and kinking and position it above the
pump support.
Fig. 4-1 Pump with fluid monitoring
unit
(1) Holder with bag hooks
(2) Irrigation fluid bags
(3) Bag deflector
(4) Pump
(5) Pump tray
(6) Bag scale/container scale
(7) Container (Bemis, Medela, Serres,
Abbott)
(8) Container holder
(9) Roller wheel base
(10) Locking foot brake
(1)
(2)
(5)
(3)
(6)
(7)
(8)
(9)
(10)
(4)