Owner`s manual

ManualsBrandsGyration ManualsRemote ControlsAir Music Remote / Compact Keyboard Kit

A A

Introduction

This users’ manual describes the operation of the R4000 PC & AV Music Remote Control Unit

with UltraSense™ Air-Mouse Technology (RCU). The RCU contains an embedded micro gyro

for motion sensing and in-air control of a ﬂoating cursor. This RCU features IR code database

and IR learning capabilities to universally control standard home theater devices such as TVs,

VCRs, Digital Video Recorders (DVR), DVD players, CD players, cable/SAT boxes, etc. Using the

Music Display on the RCU, you can browse through your audio ﬁles and listen to your music

on the PC without going to your computer. This RCU links directly to your Windows Media

Player® or iTunes® Audio library.

The RCU is also equipped with a 2.4 GHz RF transceiver to send cursor movement information

and other commands to the PC via a USB transceiver. The radio frequency (RF) transceiver

delivers a range of up to 100 feet with no line-of-sight requirement. The 800 possible

channels of the RF transceiver provide high resistance to interference from other radio devices.

Battery Installation and Information

The R4000 PC & AV Music RCU requires four AAA Alkaline batteries. To install the batteries:

1. Remove the battery compartment cover.

2. Insert the batteries, matching the batteries to the (+) and (-) marks inside the battery

compartment.

3. Replace the battery compartment cover and snap it into place.

Battery Saver

The RCU saves battery power by automatically going into a low-power state if no button is

pressed after a few seconds. See the Gyro section for gyro battery saver mode.

Product Registration Information

Keep your sales receipt to obtain warranty parts and service and for proof of purchase. Attach it

here and record the serial number in case you need it. The serial number is located on the product.

Model Number _______________________________

Serial Number ______________________ Purchase Date _____________

Dealer/Address/Phone ________________________________________

Gyro Operation

The RCU provides in-air control of the PC’s

cursor via patented gyroscopic motion

sensing technology. This means mouse-like

cursor control, from anywhere in the

room, without the need of a ﬂat surface.

There is no line-of-sight requirement

so you don’t have to point the RCU at the PC

you are controlling. Remember the

following things when using the in-air cursor

control feature of the RCU:

• Use your thumb to press the gyro and

mouse buttons.

• Click the center button to activate the

gyro motion-sensing control. Single click

and hold to move the cursor and release

it to “park” the cursor where you want it.

Double click the center button and release it

for continuous cursor movement similar to a

standard mouse.

• The right and left buttons function like

standard mouse right-click and left-click

buttons.

• Move the cursor by ﬂexing your wrist, not

your arm or body, much as you would with

a ﬂashlight; side to side and up and down.

Placing your arm on an armrest or on your

lap will make this motion more comfortable.

• The RF Transmit LED indicates when gyro

motion or other information is being

sent. The LED does not illuminate when

transmitting IR information.

1 2