Owner`s manual

functions from a device without entering the Menu Program Method.

2. Release both buttons. The device mode button turns on indicating that the RCU is now in

the Deleting All Learned Functions mode for that component.

3. Press and release 1, 2, 3 and all of the learned keys for that device will be erased. Any

other key will exit the Deleting All Learned Functions mode.

Note: Pressing the CLEAR button while in this mode will not delete the learning functions,

but it will exit this delete mode.

Music Mode

Music mode is a revolutionary new way for you to search through and play your favorite

songs that you have already setup on your Windows PC. It links directly to your

Windows Media Player or iTunes Audio library so that you can browse through your audio

ﬁles and listen to your music without going to your computer.

Note: This mode of the RCU is intended for use on the Windows operating system using

the Windows Media Player application (version 10 or higher) or iTunes application (version

7.5 or higher). Operation on other operating systems has not been veriﬁed.

Gyration Music Service Application

The RCU comes with a software application that runs in the background (as a “service”) on

the computer (PC) and interfaces to the Windows Media Player or iTunes music database. The

application communicates the music database information to the RF transceiver attached to

the computer. The information is then transmitted via RF to the RCU and shown on the display.

Gyration Music Service Application is required

for operation of the Music display. This Software

service is provided via an installation CD. Check

for software updates at www.gyration.com.

During installation of the software service,

you will select the default music interface,

Windows Media Player or iTunes. The music

interface can be changed at any time by

clicking on the tray icon, where there are

two menu items (Windows Media Player and

iTunes), with a check mark next to the active

one. You simply click on the other one to change the setting.

This software service can be enabled/disabled manually by the user. The service is set to

“enabled” by default (upon system boot). Disabling the service has no effect on normal

RCU operation (TV, PC, CAB/SAT, and AUX modes), but will make the display inoperable.

Music Display Navigation

When you press the Music Display button ( button) the Display powers up and displays

the top level menu structure. (If service application is running and within range, see the

Troubleshooting section for more details).

To move up and down the screen, use the UP and DOWN arrow keys.

To enter a menu level, use either the right (or OK) button. To back out of a level, use the

left (or Back) button. You can play the whole album by pressing the Play button at this

level, or enter the album and select a speciﬁc song.

Note: As you navigate through the menu the heading changes on the top line.

While a song is playing, the MP3 Tag information (called Metadata) will be shown on the

display along with a progress bar, the current running time and the time left for that song.