Datasheet
13/03/2015
- EN 60974-1
MADE in PRC
NOVOMIG 110
ømm
ømm
équipé d’origine /
original equipement /
originalausstatung /
equipamiento de fabrica
EN60974-1
(40°C)
50/60hz
min
▷max
GAS
NO
GAS
100 200 300
Electronic
Control
IA
(60%)
X%
(I2 max)
cm/kg
Protected & compatible
POWER GENERATOR
(+/- 15%)
230V 13A
40
▷110A
- 0.9
- - 0.9 0.9 -
85A
6%
16x37x36
14
3 kVA
www.gys.fr
NO GAS
WELDING
MACHINE
40 110A
Ref. 012950
FEATURES
EASY AND FAST SETTING
EXAMPLE OF APPLICATIONS
PORTABLE
WIRE REEL
ACCESSORIES
1 PROCESS
ELECTRICAL CONSUMPTION
With its intuitive interface
setting up the machine takes
a couple of seconds
No gas welding process allows :
• To weld with cored wire.
• To work outside without being disturbed by the wind.
• To easily carry the machine thanks to the No gas process (no gas bottle). Ideal for working in difcult access.
It is designed for repairing,
maintening and assembling
steel.
This single phase welding machine is designed to weld steel with a NO GAS process up to
110A. Portable, easy to set up thanks to the SMART board, it is designed for maintenance.
• It only weighs 14 kg.
• No gas bottle to carry.
It is designed to work with
ø100 mm wire reel
Delivered with a 1.6m earth
clamp and a 2m xed torch
NO GAS for welding outside -
Cored wire 0.9mm
Low consumption - 16A - 230V
With the Novomig no complicated adjustement.
Thanks to the Novo Controller board it is
easy to adjust the voltage (2 positions) and
the wire feeding speed.
Ideal setting indicated, just select the thickness
of the metal sheet to weld.