Datasheet

MADE in CHINA
- EN 60974-1
GYSARC 400 TRI
   MMA  TIG
INTEGRATED TECHNOLOGY
EN
60974-1 (40 °C)
U
0
 
IP
 
Protected
& compatible
power generator
(+/-15%)
50/60 Hz A A A HS AF TIG Lift SR AD CEL X (40 °C) V cm kg
400 V - 3~ 32 20  400 20  400 • • • • • •
400 A @ 60 %
350 A @ 100 %
84 58 x 52 x 30 37,5 IP 23 30 kW 36 kVA
MMA (SMAW) /
TIG (GTAW) LIFT
INVERTER
20  400 A
Ref. 013551
MMA (SMAW) : rutile (6013), basic (7018) and cellulosic (6010) electrodes (up
to Ø6 mm)
Arc gouging with carbon electrodes (up to Ø6.4 mm),
TIG (GTAW) process with LIFT arc ignition (Ø1.0 to 3.2 mm) .
Supplied without accessories
ACCESSORIES (options)
MMA (SMAW) / TIG Lift (GTAW)
STURDY
Reinforced structure.
2 steel handles for easy manipulation.
IP 23 classication for outside use.
With inverter technology, the GYSARC 400 TRI is a 3-phase MMA (SMAW) / TIG (GTAW) welding power source
with exceptional welding performance. Featuring advanced electronics, this product guarantees maximum
productivity, even in harsh environments. Its switchable Voltage Reduction Device (VRD) protects the welder
in hazardous areas (mines, chemical and petrochemical installations, shipyards, etc.).
www.gys.fr
SIMPLE AND ACCESSIBLE
Current / voltage display when welding.
Intuitive display with knobs designed to be operated while
wearing gloves.
Optional remote control (ref. 045675).
High duty cycle : 400A @ 60%.
High no-load voltage (84V) for a good arc dynamic and to facilitate the arc
ignition for cellulosic (6010) electrodes.
Optimised cooling thanks to the air-tight ventilation corridor that helps insulating
the electronic components from the dust.
HEAVY DUTY
Trolley JOB SITE XL
039568
WELDER’S PROTECTION
VRD (Voltage Reduction Device) can be activated via an internal switch
to lower no-load voltage down to 20V for safety reasons.
Arc Force Hot Start
Welding current
Adjustable Hot Start for a better arc ignition.
Adjustable Arc Force : temporary current increase when welding in
dicult situations.
Antisticking : reduce the risk of the electrode sticking to the metal when
in contact.
WELDING AIDS
Voltage display when welding
No-load voltage display (after welding)
MMA kit
500A - 4 m - 50 mm²
047419
RC-HA1 - 8 m
Remote control
045675
Gouging torch
1 000A - 5.6 bars
041516
Adaptater
5 m - 70 mm²
040670
Gouging electrode
Ø6.4 (x 50)
086081
Gouging accessories: