Brochure

ManualsBrandsGys ManualsPLASMA - CUTTER SINGLE-PHASEPLASMA CUTTER 45 CT - WITH TORCH

EASYCUT 25 EASYCUT K25 EASYCUT K35F EASYCUT 30 FV EASYCUT 40 CUTTER 45 CT CUTTER 70 CT NEOCUT 105 NEOCUT 125

Max. output current

25 A 25 A 35 A 30 A 40 A

Max. output current

45 A 70 A 105 A 125 A

Mains voltage 230 V - 1~ 230 V - 1~ 230 V - 1~ 110/230 V - 1~ 230 V - 1~ Mains voltage

110 V

230 V

400 V - 3~ 400 V - 3~ 400 V - 3~

Performance de

coupe (mm)

Separation

Steel

8 8 15 15 20

Performance de

coupe (mm)

Separation

Steel

15 30 35 40 57

Recommended 6 6 10 10 15 Recommended 10 25 25 35 40

Drilling - - - - - Drilling 5 12 15 20 25

Mechanised cutting - - - - - Mechanised cutting

Internal compressor

- - -

Internal compressor

- - - -

Automatic

air pressure control

- - - - -

Automatic

air pressure control

- -

Marking - - - - - Marking - -

Gouging - - - - - Gouging -

Protection rating IP 21 IP 21S IP 21 IP 21S IP 21 Protection rating IP 23 IP 23 IP 23 IP 23

Weight (kg) 7.8 15 30 11 8 Weight (kg) 15 22 33 36

Part no. with accessories* 065543 068063 031036 013858 029743 Part no. with accessories* 062962 013841 063112 067448

MANUAL CUTTING MANUAL OR MECHANISED CUTTING

GYS PLASMA cutter range

25 A - 125 A

Glossary

Discover the technological features of our products as

well as a brief explanation.

PFC

Power Factor Correction (PFC)

PFC technology suppresses spikes and regulates the supply current.

The electrical network is therefore better used, accepting supply voltages between 185 and

265 V and, therefore, favouring the use of extension cords or power supplies. Another im-

portant eect is that a power source equipped with this device consumes much less energy

from the grid and allows it to be used on smaller circuit breakers (e.g. 16 A).

Flexible Voltage

This technology extends the supply voltage range of the PFC from 85 to 265 V (185 to 265 V

for a standard PFC). They can therefore be used on 110 V or 230 V electrical networks.

P400

Protect 400

Power sources equipped with this technology are able to withstand occasional or perma-

nent voltage variations on the electrical network up to 400 V (lightning, engine-driven sets,

load shedding, etc.).

Anti-Dust

In this type of design, the ventilation corridor is isolated from the electronic parts, which

greatly reduces contact with external dust.

Mechanised cutting

Can be connected to a CNC cutting table.

MMA

Internal air compressor

Eliminates the need for a nearby compressed air source.

MMA

AIR

auto

Auto AIR

Automatic management of air pressure and ow for optimal cutting.

Open sheet mode

Ideal for cutting work on perforated sheets

MMA

Marking mode

Ideal for surface marking and part identication.

Gougeage

Gouging

Removal of metal in an ecient, precise and clean manner

*Power source + earth clamp

+ hand-held torch

*Power source + earth clamp

+ hand-held torch MT-70 or MT-125