Datasheet

MADE in FRANCE
- EN 60974-1
NEOPULSE 500 G
WELDING MACHINE
MIG-MAG PULSED
10  500 A
Ref. 014503
MIG/MAG :
- steel and stainless steel wire: Ø 0.6 to 1.6 mm
- aluminium wire: Ø 0.8 to 1.6 mm
- CuSi and CuAl wire: Ø 0.8 to 1.2 mm
MMA DC / Pulse : basic, rutile and cellulosic electrodes (up to Ø 6 mm)
TIG DC lift / Pulse.
Supplied without
accessories
MULTI-PROCESS WELDING
ROBUST AND MOBILE
Reinforced metal case & non slip rubber pads.
IP 23 protection rate.
Interconnection cables (air or water cooled) up to 20m (optional).
Remote settings of the wire feeder using the 2 optional remote controls (digital or analog).
4 rings/brackets for lifting/positioning.
Digital technology, the NEOPULSE 500 G is a pulsed MIG/MAG welding power source with a separate wire feeder.
Ultra high performance and designed for the highest performance level using the latest technology, it features +100
synergic curves and exceptional arc quality/performances. Intuitive and highly functional, its digital interface allows
you to change welding parameters with ease. Equipped with its NEOFEED-4W reel (optional), this welding power source
provides productivity and quality of unmatched welding on all types of alloys.
www.gys.fr
MAXIMUM PRODUCTIVITY
Intended for heavy and demanding industrial applications:
4 microprocessors increase the speed of communication and optimize the eciency of the product.
High productivity thanks to its high duty cycle (470A @ 60%).
Connectable via a SAM control interface for use on robot/automaton (optional).
Higher resistance and robustness of the electronics.
Powerful electronically controlled wire feed motor (100 W) with 4 active drive rolls.
High arc voltage for easier ignition and exceptional arc dynamic.
SMART
SYNERGIC mode : Select the material/gas type and wire diameter, now the NEOPULSE
automatically determines the optimal welding conditions and allows you to adjust the settings
(wire feed speed, voltage, current, arc length).
ADVANCED INTUITIVITY
New user friendly interface focused on welders’ navigation habits.
Complete update of the machine and synergies by USB key.
Cooling unit (ref. 032750) and trolley (ref. 037328) optional.
Storage of 500 welding programs (can be saved on USB stick).
Displays current/voltage during and after welding (WPS/PQR).
Choice of the main parameter to display on the screen (wire speed, average welding current, etc.).
Internal lighting of the motorized roll and wire reel.
Viewing window on trapdoor to check the consumption of the ller wire.
Intelligent ventilation management to reduce power consumption, dust extraction and
substation noise.
OPTIMISED MIG/MAG SETTINGS
Welding processes : Manual, Dynamic STD, Pulsed, Modul Arc (variation of hot / cold current)
TACK modes : SPOT and DELAY.
Trigger management : 2T and 4T.
Precise control over the welding cycle : CreepSpeed, Softstart, Hotstart, Upslope,
Downslope, Crater Filler, Postgas, etc.
Complete packs
Steel / Stainless steel Aluminium
062924 062931
ACCURATE
Calibration of welding accessories, to adjust the displayed voltage measurement and the energy calculation.
Energy, display and energy calculation after welding according to EN1011-1, ISO / TR 18491 and QW-409.
Portability : load / save as, JOBS from a USB key as well as the machine conguration.
Traceability : trace / record all welding steps, weld by weld, during industrial manufacturing according to EN ISO 3834.