Manual
51
GYSPOT PTI S7
EN
Then double-click in the second column to select a manufacturer le previously downloaded from our
website.
The list of spots set by the manufacturer is displayed in the second list. Select a congured point to
view the chronogram and congured parameters.
4.2 - Add a congured spot in the USER le :
To add a spot to the USER le, select the USER le from the le list and click on the button to the
right of the list of congured spots. Enter the name of the spot and press the TAB key or click outside
the list of congured spots to congure the welding parameters.
For a spot to be congured, it is possible to congure:
The pre-tightening stage
The pre-heating stage
The dierent pulses (4 pulses maximum)
And the hot and cold forging stage.
To change the settings, click on the buttons .
When the operator changes a parameter, the spot chronogram is updated.
To validate the spot conguration, click on the button .
To cancel the spot conguration, click on the button .
4.3 - Modify a spot congured in the USER le:
To change the settings of a spot, select a spot from the list and then change the welding settings.
To validate the changes, click on the button .
To cancel the changes, click on the button .
4.4 - Delete a congured point in the USER le:
Select a spot parameter from the list and click on the button to the right of the list.
Raison soc iale :
Adresse :
Ville :
Code postal :
JBDC
ZI, 134 Bd des Loges
53941
Saint-Berthevin
Email : contact@companyname.com
www.companyname.comSite Web :
Téléphone :
Télécopie :
0243510101
0243510102
1450UT53
Immatriculation :
308SW
Modèle :
01/01/2017
Mise en circulation :
AILE ARRIERE
OPERATEUR
I
ntervenant :
O
rdre de réparation :
977AC92
Commentaires
D
ate du journal :
05/04/2018
Marque :
PEUGEOT
N° châssis :
12365849
C
ommentaires :
I
ntervention :
Date M ode Outil
Consignes
Tem ps
(ms)
Intensité (kA)
Serrage
(daN)
Mesures
Intensité (kA)
Serrage
(daN)
Etat
G
YSPOT BP.LG (1712009013)
Epaisseur
(mm)
I
d
1 Auto Pince en C n°1 Point Ok630 9,4 325 9,4 325 3,505/04/18 10:22
2 Auto Pince en C n°1 Point Ok630 9,4 325 9,3 325 3,505/04/18 10:22
3 Auto Pince en C n°1 Point Ok490 8,2 240 8,2 240 2,005/04/18 10:22
4 Auto Pince en C n°1 Point Ok510 8,3 250 8,2 245 2,105/04/18 10:22
5 Auto Pince en C n°1 Point Ok510 8,3 250 8,3 245 2,105/04/18 10:22
6 Normal Pince en C n°1 Point Ok350 7,3 225 7,3 225
-
05/04/18 10:23
7 Normal Pince en C n°1 Point Ok350 7,3 225 7,2 225
-
05/04/18 10:23
8 Normal Pince en C n°1 Point Ok400 8,1 265 8,0 265
-
05/04/18 10:23
9 Normal Pince en C n°1 Point Ok400 8,1 265 8,1 260
-
05/04/18 10:23
1
0 Normal Pince en C n°1 Point Ok400 8,1 265 8,1 270
-
05/04/18 10:23
1
1 Manuel Pince en C n°1 Pression faible400 8,1 510 8,1 440
-
05/04/18 10:23