Datasheet

I RMS U
0
Cables
100%
CU
50/60hz
Liquid / Air Cooled
m
Ø
mm²
4M
3 x 400V 20A (D) 14 500A 7.3V
2.5+2.5+2.5 1.5+3
Liquid
4
OK
65x80x230
cm
92
kg
6M 6
Air (option 051010)
1.5 200
-
8
4x4
H07RNF
19/05/2022
MADE in FRANCE
- EN 60974-1
GYSPOT PTI-s7
550 daN
14 500A
250 mm
177
85
177 mm
202
40
200 mm
89
97
200 mm
118
450
350 mm
310
430
250 mm
205
600
C3 8 bar / 550 daN
021419
C8 8 bar / 550 daN
021440
C1 8 bar / 550 daN
021402
C4 8 bar / 550 daN
021426
C7 8 bar /250 daN
021433
C9 8 bar / 550 daN
020078
www.gys.fr
SPOT-WELDING
EQUIPMENT
Included :
- C1 Arm
C
A
R
M
A
N
U
F
A
C
T
U
R
E
R
S
A
P
P
R
O
V
A
L
· Liquid cooled medium frequency transformer integrated in the clamp
· Lower electricity consumption (40% less than cable machine)
· Operating with only 16 Amps delayed fuses power supply
· High duty factor
INNOVATION
The GYSPOT PTI-s7 is the ideal answer to the welding requirements of high strength steels (UHSS/boron), with a
clamping force of 550daN with 8bars air pressure, and a welding current that can reach 14 500Amps. Its C clamp
integrates a high-tech transformer and the machine also brings a solution to limited power supply issues, as it can
operate with 20 Amps fuses only. Its operation is extremely easy thanks to the automatic welding parameters setting
in EASY mode.
• Welding current :
- High welding current 14 500 A
- Sound alert if the welding current is too low
- Constant current control
- Low electrical consumption
- GLUE mode: for welding sheets with glue or other coatings
• Electrode force :
- Electrode force control
- Digital display of the actual electrode arms force
- Electrode force: 550 daN with 8 bars
- Liquid-cooled arms up to the tips
• AUTO MODE: automatic setting of welding parameters.
• 7 modes available to answer the requirements of all end users
• Record on SD card of the characteristics of each welding spot performed.
• Restoration on any PC of the reports saved on the SD card.
TRACEABILITY
MACHINE INTERFACE
PERFORMANCE
• Ideal C clamp for all types of metal works
• Lightweight clamp and easy to handle : Weight 10 kg
• Available with a clamp cable of 4m or 6m
• Support cable bracket with telescopic arm
• Remote control on the clamp
DESCRIPTION
4M - Ref. 020894 - 400V - 3φ
6M - Ref. 020900 - 400V - 3φ
ENERGY
DY
NAMIC
CONTROL
ACCESSORIES (ISOLATED ARMS)
GYRO 360°
051720
Kit earth cable
051010
Lightweight clamp: 10 Kg