Manual

SAFETY INSTRUCTIONS
This manual includes guidelines on the operation of your device
and the precautions to follow for your own safety. Ensure it
is read carefully before rst use and keep it handy for future
reference.
Risk of explosion and re!
A battery being charged can emit explosive gas.
The battery tester should only be connected to batteries with a
rated output voltage of 12 V and 24 V .
CAUTION: Reverse polarity will cause the fuse to blow and
could cause permanent damage. Damage due to reverse
polarity is not covered by our warranty.
CAUTION: If the car’s battery is disconnected, some
management systems may be disabled.
Consult your vehicle manual for more information on installation.
Do not use the battery tester if the cord or terminals are damaged.
Do not use the battery tester if it has received a severe shock or
has been damaged in any way.
Do not disassemble the device. Incorrect reassembly may result
in a risk of electric shock or re.
Acid projection hazard!
• Wear appropriate safety glasses and clothing.
• If your eyes or skin come into contact with battery acid, rinse
the affected part of the body with plenty of water and seek
immediate medical assistance.
• Avoid ames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-
circuiting.
• The device complies with European Directive.
• The certicate of compliance is available on our website.
• EAC conformity mark (Eurasian Economic Commission)
• Material conforms to UK requirements. The UK Declaration of
Conformity is available on our website (see cover page).
• Device compliant with Moroccan standards.
• The Cم (CMIM) declaration of conformity is available on our
website.
• This product should be disposed of at an appropriate recycling
facility. Do not dispose of in domestic waste.
• Recyclable product that falls within waste sorting recommen-
dations
8
PBT 700
EN
Translation of the original instructions