Metrology Tools High precision at your fingertips - Thermometer Thermal marking pen Welding gauge Wire speed meter Clamp meter Dynanometer Torch gas flow meter Work piece control Generator control
WORK PIECE CONTROL Specifications Temperature range - 50 to +380°C Accuracy ±1.5 °C or ±1.5 % of the reading Display resolution 0.1°C Repeatability 1% of reading Ref : 052994 INFRARED THERMOMETER Laser pointed aiming system. Reaction time 500 ms Backlit display for use in the dark. Spectrale reaction time 8 to 14 um Emissivity 0.95 Ergonomic and comfortable grip. Robust.
WORK PIECE CONTROL Easy to use 1 2 THERMAL MARKING PENCIL Ref : 052765 Certified temperatures. Low cost, quick readings. Accurate to +/- 3 % in Celsius ; no adjustment is required. 3 4 Long life stick : 33 % greater than some competitors DESCRIPTION The thermal marking pencil is a cheap and quick way to precisely measure the temperature of metal and equipment.
WORK PIECE CONTROL Weld measuring Ref : 053977 WELDING GAUGE • Determination of the excess thickness of a weld. Dimensions read on the vernier 1:10th. Steel / Stainless steel, scale and Vernier scale matt chrome. Screw to lock the scale. Laser graduation of Vernier and scale • Determination of the apothem or dimension of the centre for a weld angle. 0.1 mm resolution, 20 mm capacity. Dimensions read on the vernier 1:10th.
GENERATOR CONTROL Specifications MECHANICAL Measuring range +0.1 to +19 999 tr/mn Resolution 0.1 tr/min (0.5 to 999 tr/min) 1 tr/min (1000 to 19 999 tr/min) MIG/MAG WIRE SPEED TACHYMETER Easy to use with one hand. OPTIC Measuring range +2.5 to +99 999 tr/mn Resolution 0.1 tr/min (2.5 to 999 tr/min) 1 tr/min (1000 to 99 999 tr/min) Speed and length measurement. Storage of min. and max. value and of the last measured value.
GENERATOR CONTROL Specifications Current AC Current DC Voltage AC Voltage DC Resistance Range Accurancy Range Accurancy Range Accurancy Range Accurancy Range Accurancy Frequency 400 A 600 A 40 - 400 A 40 - 600 A ± 2.5% + 5d 40 - 400 A ± 2.0% + 3d 4 - 600 V 4 - 600 V ± 1.0% + 5d 400 Mv - 600 V 400 Ω - 40 MΩ Measuring AC / DC current up to 600 A. ± 1.0% + 2d Measuring resistance up to 40 MΩ with continuity buzzer. 10Hz to 10MHz Ø max. of the clamp 28 mm Wide opening jaw. 35.
TORCH CONTROL Specifications Accuracy ± 0.5% Measure frequency 5 Hz Operating temperature 5°C to 35°C Power supply 9V Alkaline battery x1 Battery life 20 h Dimensions with hook 90 x 30 x 270 mm Weight 250 g Measure from 20 g to 15 kg (accuracy of 20g). Integrated tape measure, aound 1 m. Instructions 1 Ref : 053960 ELECTRONIC DYNAMOMETER Stainless steel hook. Fit a new contact tube. Hold function, holds the display for 5 seconds. 2 Choice of units of measurement (kg, lb, N).
TORCH CONTROL Gas flow measurement Ref : 053939 TORCH GAS FLOW METER • Insert the torch tip in the torch gas flow meter. Easy to use. Graduated from 0 to 25 l/min. Cleanable by the top. Welding flow information 5 to 8 l/min • Measure the gas flow (l/min) at the end of the torch by looking at the black ball. 10x the wire Ø (eg : Ø 1 mm = 10 l/min) UA specific gas flow meter is included with Plasma Cutters. No graduation but minimal and maximal value to respect.
