Datasheet
MADE in FRANCE
- EN 60974-1
I
2
EN60974-1
(40°C)
U
0
50/60hz
TIG AC TIG DC MMA
IA
(60%)
X%
(I2 max)
cm/kg
Protected & compatible
POWER GENERATOR
(+/- 15%)
MMA TIG DC TIG AC MMA TIG DC TIG AC
230 V 1~
13 A 10-200 A 10-160 A 10-160 A 100 A 100 A 90 A 25% 25% 13% 70 V 35/50
24 x 43 x 50 /
20,5 Kg
7.5 kW
PROTIG 201L AC/DC HF
www.gys.fr
The PRO TIG 201L AC/DC is the professional TIG welding solution for welding all types of metal up to 4 mm thick (steel, stainless
steel, aluminium, copper or titanium). It ensures a very high level of precision in many areas such as fabrication, maintenance
or piping. Equipped with a cooling unit, it allows the use of more ergonomic TIG torches.
•
Welding current : from 10 to 160 A (MMA)
• MMA Standard : Accepts basic, rutile electrodes up to Ø 4 mm.
• MMA Pulse : Helps welding in a vertical upright position (nozzles/pipeline).
HIGH-TECH POWER SUPPLY
TIG WELDING
MACHINE
10▷200A
Ref. 062610 (without accessories)
6 TIG AC/DC processes
2 modes of coated electrode welding
Designed for user comfort
Pre-assembles ferrous metal parts by tacking.
• TIG DC - Standard : Ensures a quality weld on all ferrous materials such as steel, stainless
steel but also copper and its alloys, titanium...
• TIG AC - Easy : Makes the use of the welding machine easier thanks to predened settings.
The user only selects the diameter of his tungsten electrode on the interface.
• TIG AC - Standard : Designed for welding aluminium and its alloys (Al, AlSi, AlMg, AlMn...).
Alternating current provides cleaning of the aluminium for a perfect weld.
• TIG AC - SPOT : Pre-assembles the aluminium parts by tacking.
• TIG DC Pulse : Controls molten temperature, limits deformation and thus allows the assembly
of thin sheets from 0.3 mm.
• TIG DC SPOT :
• 2 types of start-up : HF (without contact) or LIFT (with contact) for electro-sensitive environments.
• 3 trigger modes:
- 2 times: maintain pressure on the trigger throughout the weld.
- 4 times: to start welding, press the trigger only once
and then press the trigger again to stop welding.
- 4T «LOG»: the operator chooses at any time between 2 welding currents by a short pulse on the trigger
(hot and cold current).
• MMA welding assistance:
- Antisticking : reduces the risks of the electrode sticking if it comes into contact with the workpiece
- Hot Start: Assists in Arc ignition and can be adjusted according to the type of metal
- Arc Force Adjustable: regulates the arc length deviations
• VRD (voltage reduction device): the welding current is only delivered when the electrode is in
contact with the workpiece (not originally activated).
Robust design for all environments
•
Reinforced chassis and Anti-shock absorbant protection
• Compact and lightweight design
• Current/Voltage display after welding (DMOS/QMOS)
• Storage of up to 50 programs per process
• Connectivity for remote controls
Sack truck
ref.039704
Trolley
ref. 041257
Manual remote
control
ref.045675
Foot pedal
ref. 045682
Acccesories (options)
• Welding current : 10 to 200 A (TIG AC), 10 to 160 A (TIG DC)
Ref. 063952 (with accessories)
PFC
POWER FACTOR CORRECTION 30% energy saved
PROTEC 400
PFC
30%
ENER G Y
S A V I N G
Without PFC
P400
PFC technology supresses peaks and
regulates the supply current. Also allows
the use of extension cords or generators
and contributes to a better current stability
during the welding phase.
Can withstand occasional or permanent vol-
tage variations on the electricical network up
to 400V (lightning, generator, load shedding
loads...)
Économique
sécurisé
PFC
P400
Économique
sécurisé
PFC
P400
ECONOMICAL
Safe
System of
cooling
integrated
Without accessories : ref. 062610
With accessories : ref. 063952
- torch SR20DB (4m)
- kit MMA