Datasheet
MADE in China
- EN 60974-1
EASYMIG 85
MIG
ømm
ømm
équipé d’origine /
original equipement
/ originalausstatung
/ equipamiento de
fabrica
MIG
EN 60974-1
(40°C)
U
0
IP
50/60 Hz
A A
NO
GAZ
100
Electronic
Control
m/min
IA
(60%)
100%
X%
(I2 max)
V cm kg
230 V - 1~ 16 30
85
0.6
0.9
10 W
1
7
0.6
0.9
50 A 40 A
85 A
20 %
30 29 x 14 x 19.5 5.5 IP 21
MIG - NO GAS
INVERTER
30
85 A
P.N. 065536
Gasless ux-cored wire welding: Ø 0.6 and 0.9 mm (double-groove roller)
Unaected by external environmental disturbances (wind, etc.)
Increased portability due to lack of bulky cylinder
ACCESSORIES
(optional)
READY TO USE
ULTRA PORTABLE
Ultra light (5 kg)
This practical and small device can be stored anywhere (shelves, cabinets, etc.)
A handle strap/shoulder strap makes it easy to move around the workshop
The EASYMIG 85 is a single-phase welding machine designed exclusively for gas-free ux-cored wire MIG
welding. Very easy to use, the only setting that can be adjusted is the wire-feed speed. Recommended for
welding steel up to 2 mm thick, the EASYMIG 85 welding unit is ideal for all types of work, even outdoors.
www.gys.fr
SECURE
Optimised workstation cooling with thermal protection
Overcurrent protected
Welding aid: wire-feed speed chart to help the user adjust the wire-feed speed (A)
according to the thickness of the workpiece (B) and the diameter of the wire used (C)
EASY TO USE
INTEGRATED WIRE-FEED REEL
Compatible wire reel: Ø 100 mm - 1 kg
Motorised wire-feed reel with two rollers
Flux-cored wire - D-type roller
Ø 0.6/0.9 mm
068926
Intuitive control panel with a
single potentiometer to select the
wire-feed speed (seven levels)
Flux-cored wire - Plastic reel Ø 100 mm
Ø 0.6 mm
086425
Ø 0.9 mm
086104
Contact tip
Ø 0.6 mm
041905
Ø 1.0 mm*
041929
Delivered in a cardboard box complete
with accessories
MIG Torch
2 m - 10 mm²
Earth clamp
1.6 m - 10 mm²
Flux-core wire reel
Ø 0.6 mm
AWS E71T-GS
Fixed-tint 11
handheld face shield
92 x 36 mm
* for ux-cored wire Ø 0.9 mm
B
C
A