Manual

3
PPi Dual Drive
1 Designated Use
The PPi hand-held welding torches are used for welding of standard
wire electrodes. They conform to EN 60 974-7 and are not considered
devices having their own functions. Arc welding can only be carried out
in connection with a welding power supply. These operating instructions
only describe PPi welding torches. PPi welding torches may only be oper-
ating using original ABICOR BINZEL spare parts.
2 Technical Data
Ambient temperature of welding
- 10 ˚C to + 40 ˚C
Transport and storage
- 25 ˚C to + 55 ˚C
Relative humidity
up to 90 % at 20 ˚ C
Control device rating
1 A AC / 250 V AC
Tab. 1 General Data
Type of voltage
DC direct voltage
Polarity of the electrode
Usually positive
Wire types
Commercially available round
wires
Type of use
Manual
Voltage rating
113 V peak value
Protection type of the machine-side
connections
IP2X, IP3X (EN 60 529)
Shielding gas (DIN EN 439)
CO
2
and mixed gas M21
Tab. 2 General torch data according to EN 60 974-7
Type
Type of
cooling
Load* Duty
Cycle
Wire ø Gas
flow
rate
Cooling data
CO
2
M21
Flow
temp.
max.
Flow
min.
Flow
Pressure
PPi
A A % mm l/m ˚ C l/min
min.
bar
max.
bar
36D
air 300 270 60 0.8-1.6 10-20
401D
liquid 400 350 100 0.8-1.6 10-20 50 1 1.5 3.5
Tab. 3 Product-specific torch data as laid out in EN 60974-7
* For pulse welding reduce rating by 35%