Manual

6
PPi Dual Drive
4.1 Equipping the torch neck PPi 36D
4 Putting into operation
1 Gas nozzle
2 Contact tip
3 Tip adapter
4 Gas diffuser
5 Torch neck
Fig. 1 Equipping the torch
1 Screw gas diffuser (4), tip holder (3) and contact tip (2) into the
torch neck (5).
2 Slide the gas nozzle (1) rotating it slightly clockwise.
Insert the torch neck (5).
4.2 Equipping the torch neck PPi 401D
1 Gas nozzle
2 Gas diffuser
3 Contact tip
4 Tip adapter
5 Torch neck
Fig. 2 Equipping the torch
1 Screw tip adapter (4), contact tip (3) and gas diffuser (2) into the
torch neck (5).
2 Slide the gas nozzle (1) rotating it slightly clockwise.
Insert the torch neck (5).
1 2 3 4 5
1 2 3 4 5
4 Putting into operation
! DANGER
Risk of injury due to unexpected start-up.
For the entire duration of maintenance, servicing, dismounting and repair work,
the following instructions must be adhered to:
•Switchoffthepowersupply.
•Closeoffthecompressedgassupply.
•Pullthemainsplug.