Brochure

11
TIG FILLER METAL
STAINLESS STEEL TIG FILLER METAL (308L)
TIG Inox 308L filler metal in rods for welding austenitic stainless steels without
molybdenum (304, 304L, 321, 347). It is recommended as a first pass in all cases
where regular penetration and good compactness are required.
Application
• Pipes, structures of fine thickness less than or equal to 3 mm and for penetration
passes,
• Reserved for assemblies not exceeding 350 ° C in service temperature.
Products
• Suitable for food, organic acid ... (308L).
• Resistant corrosion.
Classification
AWS A5.9: ER 308L
EN ISO 14343-A: W19 9 L
Recommendations
Ø electrode
(mm)
1.6 2 2.4
thickness (mm)
1.5 2.0 2.0 2.5 2.5 3.0
Welding current (A)
60 95 90 110 120 150
Gas protection according to standard EN ISO 14175
100% Argon (l1): 6-12 l / min
Reverse: Argon / Nitrogen: 3-6 l / min
Mechanical properties the Chemical properties
Rp 0.2 Rm A 5 d KV -196 ° C C max% Mn% Yes % Cr% Ni% S max P max Fe
400 Mpa 600 Mpa 38% 48 J 0.025 1.80 0.45 20.20 10.00 0.02 0.02 Based
Approval
TÜV - Vd TÜV - DB - CE
TIG WELDING
STAINLESS STEELS
Conditioning
Ref. Ø (mm) length (mm)
x...
069510 Ø 1.2 330 108
087248 Ø 1.6 330 60
087255 Ø 2.0 330 40
Ref. Ø (mm) length (mm)
x...
069497 Ø 1.2 1000 110
087118 Ø 1.2 1000 560
069428 Ø 1.6 1000 60
087156 Ø 1.6 1000 315
069435 Ø 2.0 1000 40
087163 Ø 2.0 1000 205