Brochure

12
TIG FILLER METAL
STAINLESS STEEL TIG FILLER METAL (316L)
TIG stainless steel 316L filler metal rod for welding austenitic stainless steels
with and without molybdenum (316, 316L, 316 Ti / Nb304, 304L). It is recom-
mended as a first pass in all cases where penetration regularity and good
compactness are required.
Application
• Pipes, structures of fine thickness less than or equal to 3 mm and for penetration
passes,
• Reserved for assemblies not exceeding 350 ° C in service temperature.
Products
• Suitable for corrosive environments, acids, chlorine ...
• Resistant corrosion.
Classification
AWS A5.9: ER 316L
EN ISO 14343-A: W19 12 3 L
Recommendations
Ø electrode
(mm)
1.6 2 2.4
thickness (mm)
1.5 2.0 2.0 2.5 2.5 3.0
Welding current (A)
60 95 90 110 120 150
Gas protection according to standard EN ISO 14175
100% Argon (l1): 6-12 l / min
Reverse: Argon / Nitrogen: 3-6 l / min
Mechanical properties the Chemical properties
Rp 0.2 Rm A 5 d KV -196 ° C Cmax% Mn% Yes % Cr% Ni% Mo% Smax% Pmax% Fe
410 Mpa 600 Mpa 35% 45 J 0.025 1.80 0.45 19.00 12.00 2.60 0.02 0.02 Based
Approval
TÜV - Vd TÜV - DB - CE
TIG WELDING
STAINLESS STEELS
Conditioning
Ref. Ø (mm) length (mm)
x...
069527 Ø 1.2 330 108
087262 Ø 1.6 330 60
087279 Ø 2.0 330 40
Ref. Ø (mm) length (mm)
x...
069442 Ø 1.2 1000 110
069480 Ø 1.2 1000 560
069459 Ø 1.6 1000 60
087125 Ø 1.6 1000 315
069466 Ø 2.0 1000 40
087200 Ø 2.0 1000 205
069473 Ø 2.4 1000 28
087149 Ø 2.4 1000 140