Brochure

33
SPOOLS OF THREAD
SOLID ALUMINUM WIRE AlMg5Cr (5356)
5% Mg alloy aluminum wire intended for MIG welding of AlMg alloys (Mg up
to 5%) resistant to marine corrosion. The deposited metal is more resistant to
hot cracking than Aluminum-Magnesium alloys with a lower Mg content. It is
suitable for beads of similar colors on materials suitable for anodizing.
MIG WELDING
ALUMINUM ALLOYS
Coil type Wire diameter (mm)
weight (kg)

Ø 0.6 Ø 0.8 Ø 1.0 Ø 1.2
7
_
B300
_ _
086487 086494
PRODUCT OF THE RANGE
Application
• Naval constructions,
• Road and rail transport,
• Bennes,
• Armament,
• Signaling,
• Automotive.
Products
• Excellent resistance to corrosion (saline environment).
• Very good mechanical characteristics.
Classification
AWS 5.10: ER 5356
EN ISO 18273: S Al 5356 (AlMg5Cr)
Polarity
DC
Recommendations
Gas protection according to standard EN ISO 14175
100% Argon (l1) or 100% Helium (l2) or Argon / Helium mixture (3): 14 to 24 l / min
Mechanical properties
Rp0.2 Rm A 5 d
110 Mpa 240 Mpa 17%
Chemical properties
Yes % Fe% Cu% Mn% Mg% Cr% Zn% Be% Ti%
<0.25 0.40 <0.10 0.05 - 0.20 4.50 - 5.50 0.05 - 0.20 <0.10 <0.0003 0.06 - 0.20
Approval
DNV, ABS, DB, Vd TÜV, Bureau Veritas, Germanisher Lloyd