Safety data sheet Article 24486637

ManualsBrandsGys ManualsMachinesStainless steel electrode 316 L

Revision number: 3

Date: 04-11-2011

Supersedes SSE5EN ed. 2 dd 25-01-2010

MATERIAL SAFETY

DATA SHEET

INOX 316 RLC

SSE5EN – 221

I.N.E. S.p.A. Via Facca 10 35013 Cittadella (PADOVA) ITALY

Tel. : +39 049/9481111 Fax: + 39 049/9400249 Internet: www.ine.it E mail: ine@ine.it page 1 of 4

1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY

Identification of the product: INOX 316 RLC

Use: Covered electrodes for manual metal arc welding.

Company identification: I.N.E. S.p.A.

Via Facca 10

35013 Cittadella (PADOVA) ITALY

Tel. : +39 049/9481111 Fax: + 39 049/9400249

Internet: www.ine.it E mail: ine@ine.it

Emergency phone number: I.N.E. S.p.A. +39 049/9481138

Ore 8.30-12-30 e 13.30-17.30

2. HAZARDS IDENTIFICATION

Risk by welding use

Heat: Spatter and melting metal can cause burn injuries.

Radiation: UV, IR radiations. Arc ray can severely damage eyes or skin.

Fumes: Formation of dangerous fumes during use. Inhalation of welding fumes may

cause respiratory irritation. Cough. Excessive or prolonged inhalation of

fumes may cause metal fume fever.

Electricity Electric shocks can kill.

Magnetic fields: Persons with a pacemaker should not go near welding or cutting operations

until they have consulted their doctor and obtained information from the

manufacturer f the device.

Noise: Noises generated by welding equipment could damage auditory system.

3. COMPOSITION / INFORMATION ON INGREDIENTS

This product is considered to be hazardous and contains hazardous components (Cr > 15% / < 25%, Ni > 10% / < 15%).

Substance name Value N. CAS EC No. Substance no. Classification

Iron 22 - 47 % 7439-89-6 231-096-4 –

Manganese 1.00 - 3.00 % 7439-96-5 231-105-1 –

Rutile (TiO

)

3.00 - 10.00 % 1317-80-2 215-282-2

Minerals (as feldspar) 3.00 - 10.00 % 68476-25-5 270-666-7 –

Fluorspar (CaF

)

1.00 - 3.00 % 7789-75-5 232-188-7 –

Minerals (as mica) 3.00 - 10.00 % 12001-26-2 310-127-6 –

Cellulose 0.50 - 2.00 % 9004-34-6 232-674-9 –

Limestone (CaCo

)

1.00 - 3.00 % 1317-65-3 215-279-6 –

Potassium silicate 1.00 - 3.00 % 1312-76-1 215-199-1 –

Quartz (SiO

)

1.00 - 3.00 % 14808-60-7 238-878-4 –

Nickel 0.10 - 1.00 % 7440-02-0 231-111-4 028-002-00-7

Carc. Cat.3, Xn, T,

R40

R43

R48/23

Nickel (powder excluded) 7.00 - 10.00 % 7440-02-0 231-111-4 028-002-00-7

Carc. Cat.3, Xn, T,

R40

R43

R48/23

Cromium 10 - 25 % 7440-47-3 231-157-5 –

Molybdenum 1.00 - 4.00 % 7439-96-7 231-107-2 –

Summary of content (4 pages)

PAGE 1
Revision number: 3 MATERIAL SAFETY DATA SHEET INOX 316 RLC Date: 04-11-2011 Supersedes SSE5EN ed. 2 dd 25-01-2010 SSE5EN – 221 1. IDENTIFICATION OF THE SUBSTANCE / PREPARATION AND OF THE COMPANY Identification of the product: Use: Company identification: INOX 316 RLC Covered electrodes for manual metal arc welding. I.N.E. S.p.A. Via Facca 10 35013 Cittadella (PADOVA) ITALY Tel. : +39 049/9481111 Fax: + 39 049/9400249 Internet: www.ine.it E mail: ine@ine.it I.N.E. S.p.A. +39 049/9481138 Ore 8.
PAGE 2
Revision number: 3 MATERIAL SAFETY DATA SHEET INOX 316 RLC Date: 04-11-2011 Supersedes SSE5EN ed. 2 dd 25-01-2010 SSE5EN – 221 4. FIRST AID MEASURES EMERGENCY AND FIRST AID PROCEDURES Inhalation: Skin contact: Eye contact: Ingestion: Assure fresh air breathing. Obtain medical attention if breathing difficulty persists. Take off immediately all contaminated clothing. Flush with plenty of water. Seek medical advice. Rinse immediately with plenty of water. Seek medical attention immediately. Rinse mouth.
PAGE 3
Revision number: 3 MATERIAL SAFETY DATA SHEET INOX 316 RLC Date: 04-11-2011 Supersedes SSE5EN ed. 2 dd 25-01-2010 SSE5EN – 221 Occupational Exposure Limits Substance CAS Limit value (TLV) * Manganese and inorganic compounds (as Mn) 7439-96-5 0.2 mg/m3 Si oxides (as Si fumes) 69012-64-1 2 mg/m3 Fe oxides (powder and fumes as Fe) 1309-37-1 5 mg/m3 Titanium oxides 13463-67-7 10 mg/m3 3 mg/m3 Particles not otherwise classified (PNOC) Cr, powder and inorganic compounds (as Cr) 7440-47-3 0.
PAGE 4
Revision number: 3 MATERIAL SAFETY DATA SHEET INOX 316 RLC Date: 04-11-2011 Supersedes SSE5EN ed. 2 dd 25-01-2010 SSE5EN – 221 11. TOXICOLOGICAL INFORMATION Toxicity information: Acute toxicity: Chronic toxicity: This material is not toxic, its emissions may induce an allergic or sensitization reaction and thereby aggravate existing systemic disease. Irritation to the respiratory tract and to other mucous membranes. Overexposure to welding fumes may cause : Nausea. Fever. Giddiness. Eye irritation.