Owner's manual

ManualsBrandsH-B Instrument ManualsMeasuring instruments696

OPERATION INSTRUCTION

1. Main function:

 Six function keys: SNOOZE, SET, ALARM, CHANNEL, UP, DOWN

 Seven languages to show the day: English, German, French, Italian, Spanish, Dutch,

Danish

 Four digit number to show time: Hour, Minute

 Perpetual calendar from year 2000 to 2099

 12/24 hour selectable

 °C/°F selectable

 Indoor temperature range: 0℃--50 ℃

 Indoor humidity range: 20%-90%

 Outdoor temperature range: -20℃--+60℃

 Outdoor temperature with RF: up to 3 channels

 Indoor/outdoor thermometer trend indicator

 Indication of the comfort index: up to 3 times

 Three channels outdoor temperature

 Button beep ‘BI’

 Single-round alarm setting

 Snooze function, delay time for 5 minute to alarm

 Eight kinds moon phase display

2. Key functions:

FUNCTION

OPERATION

SET ALARM UP DOWN SNOOZE CHANNEL

STANDARD MODE

CLICK -----------

ALARM

ON/OFF

12/24Hr SWT

ICHABLE

°C/°F

SWTICHA

BLE

-----------

SWTICH

CHANNEL

CH1,CH2,CH3

HOLD

ENTER

INTO

CLOCK

SETTING

ENTER

INTO

ALARM

SETTING

------------ ----------- -----------

CLEAR

CURRENT

REGISTERD

TIME SET

CLICK

CONFIRM

THE

SETTING

ITEM

-----------

ONE STEP

FORWARD

ONE STEP

BACKWA

----------- -----------

HOLD ----------- ------------

8STEPS/SEC

OND

FORWARD

STEPS/SE

COND

----------- -----------

Summary of content (4 pages)

PAGE 1
OPERATION INSTRUCTION 1.
PAGE 2
BACKWA RD ALARM SET CONFIRM CLICK -------------- THE ONE STEP SETTING FORWARD ITEM ONE STEP BACKWA ----------- ----------- ----------- ----------- RD 8 HOLD ----------- ----------- 8STEPS/SEC STEPS/SE OND COND FORWARD BACKWA RD 3. Function Instruction: 3.
PAGE 3
 The system will exit automatically if no key is operated in 8 seconds  Click ‘Alarm’ key to alarm  The BUZZER will ring every two minutes as blow: a. 0 – 10 sec.: one “beep” per second b. 10 – 20 sec.: two “beep” per second c. 20 – 30 sec.: four “beep” per second d. after 30 sec.: “ “Beep” continuously  When ringing, click “SNOOZE” key once to enter into 5 minutes snooze states, exit if any other key is clicked. 4.0 Power-on & Reset  When open or reset, picture of LCD will display 3 seconds.
PAGE 4
 During RCC receiving, alarm rings, RCC receiving stop,  When DST is able and is receiving the signal, it will display the symbol of sun on the LCD  When signal of RCC shows, reset time again, RCC signal close. 5.Other Setting and Instruction 5.1 Figure out the comfort of temperature and trend instruction  The trend UP, when current temperature and accumulation temperature differential value was bigger than 1 ℃.