SDS

Section 8. Exposure controls/personal protection
Safety eyewear complying with an approved standard should be used when a risk
assessment indicates this is necessary to avoid exposure to liquid splashes, mists,
gases or dusts. If contact is possible, the following protection should be worn, unless
the assessment indicates a higher degree of protection: chemical splash goggles.
Eye/face protection
:
Emissions from ventilation or work process equipment should be checked to ensure
they comply with the requirements of environmental protection legislation. In some
cases, fume scrubbers, filters or engineering modifications to the process equipment
will be necessary to reduce emissions to acceptable levels.
Appropriate engineering
controls
:
Use only with adequate ventilation. Use process enclosures, local exhaust ventilation or
other engineering controls to keep worker exposure to airborne contaminants below any
recommended or statutory limits. The engineering controls also need to keep gas,
vapor or dust concentrations below any lower explosive limits. Use explosion-proof
ventilation equipment.
Wash hands, forearms and face thoroughly after handling chemical products, before
eating, smoking and using the lavatory and at the end of the working period.
Appropriate techniques should be used to remove potentially contaminated clothing.
Wash contaminated clothing before reusing. Ensure that eyewash stations and safety
showers are close to the workstation location.
Hygiene measures
:
Individual protection measures
CA Quebec Provincial (Canada, 1/2014).
TWAEV: 50 ppm 8 hours.
TWAEV: 246 mg/m³ 8 hours.
CA Saskatchewan Provincial (Canada,
7/2013).
STEL: 74 ppm 15 minutes.
TWA: 50 ppm 8 hours.
Xylene
1330-20-7
CA Alberta Provincial (Canada, 6/2018).
8 hrs OEL: 100 ppm 8 hours.
15 min OEL: 651 mg/m³ 15 minutes.
15 min OEL: 150 ppm 15 minutes.
8 hrs OEL: 434 mg/m³ 8 hours.
CA British Columbia Provincial (Canada,
5/2019).
TWA: 100 ppm 8 hours.
STEL: 150 ppm 15 minutes.
CA Quebec Provincial (Canada, 1/2014).
TWAEV: 100 ppm 8 hours.
TWAEV: 434 mg/m³ 8 hours.
STEV: 150 ppm 15 minutes.
STEV: 651 mg/m³ 15 minutes.
CA Ontario Provincial (Canada, 1/2018).
STEL: 150 ppm 15 minutes.
TWA: 100 ppm 8 hours.
CA Saskatchewan Provincial (Canada,
7/2013).
STEL: 150 ppm 15 minutes.
TWA: 100 ppm 8 hours.
Environmental exposure
controls
:
1,2,4-Trimethylbenzene
95-63-6
NOM-010-STPS-2014 (Mexico, 4/2016).
TWA: 25 ppm 8 hours.
1,3,5-Trimethylbenzene
108-67-8
NOM-010-STPS-2014 (Mexico, 4/2016).
TWA: 25 ppm 8 hours.
Exposure limits
Occupational exposure limits (Mexico)
CAS #
Date of issue/Date of revision
:
12/1/2019
Date of previous issue
:
12/3/2018
Version
:
9
7/15
50.15501-
H&C® CLEARPROTECT™ Solvent Based Cure and Seal
SHW-85-NA-GHS-US