User's Manual

H&D Wireless AB, SPB209A Application Note page 12 ( 14)
1453- SPB209A Rev E
Copyright © 2016 H&D Wireless AB, All rights reserved
country_code=<country_code>
Valid <country_code>'s are:
US # US FCC
CA # IC Canada
EU # ETSI
ES # Spain
FR # France
JP # Japan
CN # China
9. Start the AP by typing:
sudo hostapd <hostapd_config_file_name>
AP should now be up and running
10. To run traffic, assign a fixed ip address to the interface:
sudo ifconfig uap0 <dersired ip> #e.g. 192.168.10.1
11. Associate a station and assign a static ip at the same subnet
12. To remove the uap0 interface, kill the hostapd process and run:
sudo iw dev uap0 del
3 Regulatory
Country
Approval
authority
Regulatory Frequency band
USA FCC FCC ID: XO2SPB209A
2.412 GHz
-
2.462 GHz
5.250 GHz – 5.725 GHz
Canada IC IC: 8713A-SPB209A
2.412 GHz
-
2.462 GHz
5.250 GHz – 5.725 GHz
Europe National ETSI/EN
2.412 GHz
-
2.4835 GHz
5.150 GHz – 5.725 GHz
Table 3-1: Regulatory standards
Note that usage in the 5 GHz band is not allowed for Chip Antenna WE-MCA: 7488910245. For further
details, see the document “Hardware Design Guide SPB209A Application Note”.